Salary: $93,730.00 - $124,440.00 Annually
Location : FL 34471, FL
Job Type: Full-Time
Job Number: 11526
Department: Electric
Opening Date: 01/15/2026
Closing Date: Continuous
Description GENERAL DESCRIPTION OF POSITION This professional engineering position is responsible for ensuring the reliability, safety, and standardization of Ocala Electric Utility's transmission and distribution systems. The Electric Reliability & Standards Engineer leads the analysis and improvement of system reliability performance, manages the development and enforcement of construction and material standards, and provides technical direction for protection coordination, fault studies, and corrective design.
The position collaborates closely with the Electric Engineering Supervisor - Planning & Design to ensure design practices align with system reliability strategies and long-term infrastructure goals. It functions as a technical authority and subject-matter expert supporting Engineering, Operations, and Procurement to strengthen electric system integrity, efficiency, and customer reliability. This position reports directly to the Engineering & GIS Manager or designee.
Examples of Duties ESSENTIAL DUTIES AND RESPONSIBILITIES-Lead System Reliability Analysis and Performance Improvement: Monitor, analyze, and report on electric system reliability indices (SAIDI, SAIFI, CAIDI, MAIFI, etc.). Investigate outages, equipment failures, and recurring reliability concerns. Recommend corrective actions and coordinate implementation with Operations, Engineering, and T&D field crews. Develop and maintain dashboards and reports that track reliability trends and performance improvements across the utility.
-Develop and Maintain Construction and Material Standards: Lead the creation, review, and publication of electric system construction and material standards. Evaluate materials and vendors to ensure quality, availability, and cost-effectiveness. Maintain the approved materials catalog and coordinate with all stakeholders on specification updates and stocking strategies. Provide training and guidance to engineers, technicians, and field staff on new standards, materials, and procedures to ensure consistency and compliance.
-Perform Protection, Coordination, and Relaying Engineering: Lead the development and application of protection philosophies, coordination standards, and distribution relaying schemes for the transmission and distribution system. Conduct system-wide fault and coordination studies to ensure proper protection margins, device selectivity, and compliance with reliability and safety standards. Develop, maintain, and verify relay settings and protective-device parameters, including reclosers, fuses, and sectionalizing equipment. Collaborate with Substation, T&D, and System Operations personnel to implement, test, and validate protection and automation schemes. Provide technical guidance on relay applications, coordination practices, and communication interfaces supporting system protection and reliability objectives.
-Provide Engineering Governance and Technical Expertise: Serve as a subject-matter expert during post-event technical evaluations, reliability investigations, and engineering reviews. Maintain system models and reliability-related datasets. Review and recommend technology, automation, and analytical tools that improve reliability performance. Participate in cross-departmental working groups addressing reliability, standards, and asset performance.
-Support Operational Coordination and System Analysis: Provide technical and analytical support to System Operations, Substation, and T&D staff to ensure effective coordination and reliable system performance. Collaborate on operational planning, event analysis, and post-incident reviews to identify system improvements and enhance protection and reliability practices. Serve as a reliability liaison between Engineering and System Operations to align operational activities with engineering standards and reliability objectives.
-Lead Continuous Improvement and Documentation Initiatives: Maintain detailed records of reliability studies, standards revisions, and materials evaluations. Prepare technical reports and presentations for management summarizing reliability trends, material performance, and improvement initiatives. Support long-term planning efforts and contribute to capital improvement recommendations through data-driven reliability analysis.
Perform any other related duties as required or assigned.
Minimum Qualifications QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, s
kill, and/or ability required.
EDUCATION AND EXPERIENCE -Bachelor's degree in Engineering (Electrical preferred; Mechanical considered) from an accredited college or university. An equivalent combination of education and training may be considered.
-Minimum of eight (8) years of progressively responsible experience in electric utility reliability, protection, or standards engineering.
-Experience must include system analysis, fault and coordination studies, and the development or maintenance of protective-device settings and construction standards.
-Must demonstrate extensive knowledge of the National Electrical Safety Code (NESC), IEEE protection and coordination standards, and electric utility engineering analysis and modeling software.
REQUIRED CERTIFICATES, LICENSES, REGISTRATIONS-Must possess a valid Florida Driver's License with an acceptable driving record.
-Certification or documented training in electric utility protection and coordination principles is preferred at time of hire and required within twelve (12) months of employment.
PREFERRED CERTIFICATES, LICENSES, REGISTRATIONS-E.I.T. (Engineer-in-Training) or F.E. (Fundamentals of Engineering) certification preferred.
-P.E. (Professional Engineer) license desirable.
-Specialized training or certification in protective relaying, coordination, or power-system protection.
Supplemental Information ANALYTICAL ABILITY / PROBLEM SOLVINGMODERATELY DIRECTED. Activities covered by wide-ranging policies and courses of action, and generally directed as to execution and review.
PLANNINGWith regard to general assignments in planning time, method, manner and/or sequence of performance of own work.
CONSIDERABLE RESPONSIBILITY; may also occasionally assist in the planning of work assignments performed by others within a limited area of operation.
DECISION MAKINGPerforms work operations which permit opportunity for decision-making of minor importance. FREQUENTLY;
Performs work operations which permit opportunity for decision-making of major importance. FREQUENTLY;
COMMUNICATION SKILLSAbility to read, analyze, and understand common scientific and technical journals, financial reports, and legal documents; Ability to respond to complex or difficult inquiries or complaints.
MATHEMATICAL SKILLSAbility to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory.
CRITICAL THINKING SKILLSAbility to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. Ability to deal with noverbal, logical or scientific symbolism such as formulas, scientific equations, and graphs.
SUPERVISION RECEIVEDUnder general direction, WORKING FROM POLICIES AND GENERAL DIRECTIVES. RARELY REFERS SPECIFIC CASES TO supervisor unless clarification or interpretation of the organization's policy is required.
MENTAL DEMANDHIGHLY INTENSE; Continual involvement with strategic and operational management functions which relate to both the short-term and long-term time periods.
USE OF MACHINES, EQUIPMENT AND/OR COMPUTERRegular use of highly complex machines and equipment; specialized or advanced software programs.
ACCURACYProbable errors would normally not be detected in succeeding operations and could have serious effects in relationships with patrons and/or with the operations of other segments of the organization. Frequent possibilities of error would exist at all times.
PUBLIC CONTACTRegular contacts with patrons initiated by the employee. Involves furnishing and obtaining information and, attempting to influence the decisions of those contacted. Failure to exercise proper judgment may result in important losses to the organization.
EMPLOYEE CONTACTContact with other departments or offices and also frequently with individuals in middle level positions; consulting on problems that necessitate judgment and tact, plus frequent contact with senior level internal officials.
SOFTWARE SKILLS REQUIREDAccounting
BasicAlphanumeric Data Entry
IntermediateContact Management
BasicDatabase
AdvancedEnterprise Resource Planning
IntermediateHuman Resources Systems
BasicPayroll Systems
NonePresentation/PowerPoint
AdvancedProgramming Languages
IntermediateSpreadsheet
AdvancedWord Processing/Typing
AdvancedADDITIONAL SOFTWARE SKILLSProficient in specialized engineering and analytical software used for electric system modeling, protection coordination, and reliability analysis.
Experienced with data visualization and reporting platforms to evaluate system performance and support decision-making.
Demonstrates strong skills in Microsoft Office applications, AutoCAD, and GIS-based programs to develop, document, and maintain construction standards and technical records.
Experience with Milsoft modeling software or similar electric utility analysis platforms is preferred.
OTHER SKILLSRequires expert knowledge of electric system reliability, protection coordination, and construction standards.
Must demonstrate strong analytical, critical thinking, and problem-solving skills with the ability to evaluate complex technical data and develop sound engineering recommendations.
Requires a high level of attention to detail and the ability to manage multiple priorities while maintaining accuracy and efficiency.
Must possess strong written and verbal communication skills and the ability to collaborate effectively with staff at all levels, contractors, and other utility departments.
Demonstrates sound professional judgment, initiative, and a commitment to continuous improvement in support of system reliability and operational excellence.
PHYSICAL ACTIVITIESWhile performing the functions of this job, the employee may be required to:
Stand
FrequentlyWalk
FrequentlySit
RegularlyUse hands to handle or feel
ContinuouslyReach with hands and arms
RegularlyClimb or balance
OccasionallyStoop, kneel, crouch or crawl
OccasionallyTalk or hear
ContinuouslyTaste or smell
NeverWEIGHT LIFT REQUIREMENTSThe employee must occasionally lift and/or move:
Up to 50 pounds
VISION REQUIREMENTSpecific vision abilities required by this job may include:
Ability to adjust focus (work duties that require the ability to adjust the eye to bring an object into sharp focus at various distances or focal lengths).
ENVIRONMENTAL CONDITIONSThe following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work near moving mechanical parts (spinning shafts, engines, lifts, etc.)
OccasionallyWork in high, precarious places (tall structures, bucket lifts, extension ladders, etc.)
NeverFumes or airborne particles (painting, sanding, solvents, flying lint or dust particles, etc.)
NeverToxic or caustic chemicals (including potential for chemical spills, etc.)
NeverOutdoor weather conditions (exposure to outdoor heat, cold or inclement weather)
RegularlyWet or humid conditions (not weather-related, such as greenhouse, carwash, etc.)
NeverExtreme cold (not weather-related, such as freezer, cold storage, etc.)
NeverExtreme heat not weather-related, such as furnace, kitchen, ovens, etc. where temp is regularly above 100 degrees F)
NeverRisk of electrical shock (live electrical wires, equipment that retains power after shutoff)
RegularlyWork with explosives (TNT, dynamite, nitroglycerine or other related explosives)
NeverRisk of radiation (x-ray equipment, nuclear radiation, electromagnetic radiation, etc.)
OccasionallyVibration (jack hammer, soil compactor, equipment that creates high vibration, etc.)
NeverThe noise level in the work environment is usually
Moderate (business office with computers/printers, light traffic, etc.)
ADDITIONAL INFORMATIONEmphasis is on engineering governance, system protection, and reliability analysis.
This position requires a high degree of technical independence, analytical judgment, and professional accountability to ensure that construction standards, materials, and operating practices support long-term system reliability, safety, and efficiency.
Work involves close collaboration with Engineering, T&D, Substation, Operations, and Procurement staff to evaluate system performance and implement reliability improvements.
The position functions as a senior technical expert responsible for maintaining compliance with applicable codes, standards, and industry best practices.
Participation in after-hours response, technical review, or post-event analysis may occasionally be required.
This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed when circumstances change (e.g., emergencies, changes in personnel, workload, rush jobs, or technological developments).The City of Ocala provides a competitive, comprehensive benefit package for all full-time employees.
Health InsuranceWe offer both single and family coverage, for employees working 30 or more hours per week.
Dental InsuranceFor full time employees, we offer both single and family dental coverage.
Vision InsuranceFor full time employees, we offer both single and family vision coverage.
Life Insurance For full time employees, the City of Ocala provides Basic Life and Accidental Death and Dismemberments policies as an employer paid benefit. Employees can opt for additional coverage such as supplemental voluntary life, spouse life, dependent life, and child life. For full time employees, the City of Ocala provides Basic Life and Accidental Death and Dismemberments policies as an employer paid benefit. Employees can opt for additional coverage such as supplemental voluntary life, spouse life, dependent life, and child life.
Short Term and Long Term DisabilityOffered to full time employees, STD and LTD coverages are income replacement benefits that assist policyholders who are unable to work for an extended period of time due to sickness or accidental injury.
Medical FSA (Flexible Spending Account) and Dependent Care FSAFlexible spending accounts allow employees to pay out-of-pocket medical, dental, vision, and dependent care expenses using pre-tax dollars.
Pet InsuranceWe also offer special pet insurance for your pets in the case of illness or accidents, as well as preventative care.
Employee Health & Wellness CenterThe City of Ocala offers the use of the City Clinic for those employees, and covered dependents over the age of 8, which have elected one of our health insurance plans. Services offered by the City Clinic include primary care, chronic disease management, labs, x-rays, and wellness coaching.
Voluntary Cancer InsuranceFor full time employees, the cancer insurance policy can help provide security if you, or a covered dependent, suddenly become diagnosed with cancer.
Supplemental Critical Care InsuranceOur full time employees have the option of electing critical care insurance that is available to help with medical expenses that could arise from things such as a heart attack or stroke.
Supplemental Accident InsuranceAlso available to full time employees, is our Accident Coverage. This supplemental plan can be used to help with expenses like MRI's, physical therapy, and hospital admission.
Legal Plan InsuranceFull time employees can have access to local attorneys for a monthly fee and receive discounts on services such as legal consultation, wills, traffic violations and the purchase or sale of your home. The carrier also has a separate policy assisting with the matter of identity theft and social media monitoring.
Deferred Compensation PlanDeferred compensation is available to all full-time employees at the time of employment. This benefit allows the employee to defer income without paying taxes until money is withdrawn. Current plan is administered through MissionSquare.
Direct DepositDirect deposit automatically deposits your net pay each pay period to your checking or savings account at your own financial institution. Direct deposit is a condition of employment for a person hired by the City.
Each pay period the employee receives an earnings statement showing gross pay, taxes, other deductions, accruals and net pay. Enrollment forms are available at Human Resources or Payroll.
Discounts - Theme ParkDiscounts are available to all non-temporary employees at the time of employment.
Employee Assistance Program (EAP)The Employee Assistance Program is available to all full-time employees and members of your household as an employer paid benefit. The EAP offers emotional wellbeing support in the form as counseling sessions and all sessions are confidential. The EAP also provides daily life assistance, legal services, and financial services.
Holidays and Paid Time offThe City provides paid holidays and paid time off for full-time employees. Refer to the Employee Handbook for details.
Retirement PlanAll full-time employees hired after 10/01/2013, apart from Sworn Police Officers and Firefighters, are enrolled in the 401a Defined Contribution Retirement Plan with MissionSquare. All contributions to the 401a Defined contribution plan are pre-tax and earnings grow tax-deferred. The City contributes 8% and employees contribute 3%. City contributions are 100% vested after one year of employment. You will be enrolled automatically and should take time to review your investment options at your earliest convenience.
Training ProgramsThe City is committed to provide training programs for all departments and all positions. Risk Management conducts classes in Defensive Driving, Safety, and Insurance. With rare exceptions, classes are offered during working hours, and are open to all eligible employees.
Tuition ReimbursementAll regular, full-time employees are eligible to participate in the tuition reimbursement program.
01
Do you possess a valid State of Florida Operator Driver's License with an acceptable driving record
OR If you possess a valid out of state license, do you have the ability to obtain a Florida driver's license prior to employment?
02
Do you have a high school diploma or GED?
03
Please select the level of Engineering, Electrical, or Mechanical Degree you possess from an accredited college or university.
- None
- Associate Degree
- Bachelor's Degree
- Master's Degree or above
04
Please select the number of years of progressively responsible experience in electric utility reliability, protection, or standards engineering.
- None
- 7 years or less
- 8 -9 years
- 10 - 11 years
- 12 years or more
05
Does your experience include system analysis, fault and coordination studies, and the development or maintenance of protective-device settings and construction standards?
06
Do you have the ability to demonstrate extensive knowledge of the National Electrical Safety Code (NESC), IEEE protection and coordination standards, and electric utility engineering analysis and modeling software?
07
Do you understand certification or documented training in electric utility protection and coordination principles is preferred at time of hire or must be obtained within twelve (12) months of employment?
08
Do you possess the following certification: E.I.T. (Engineer-in-Training) or F.E. (Fundamentals of Engineering?
09
Do you possess the following license: P.E. (Professional Engineer)?
10
Do you possess expert knowledge of electric system reliability, protection coordination, and construction standards?
11
Are you proficient in specialized engineering and analytical software used for electric system modeling, protection coordination, and reliability analysis?
12
Do you have the ability to demonstrate strong skills in Microsoft Office applications, AutoCAD, and GIS-based programs to develop, document, and maintain construction standards and technical records?
13
Do you have experience with Milsoft modeling software or similar electric utility analysis platforms?
14
If you feel you qualify for this position due to an equivalent combination of training, education and experience, please explain below:
15
I understand and agree with the following statements: * All background, education and work history will be verified once an offer of employment has been extended and accepted.* Any false or incomplete answer may be grounds for not employing me or for dismissing me after I begin work. Required Question