26 jobs found in Katy, TX

Summary We are seeking an Automation Engineer to support the implementation, commissioning, maintenance, and continuous improvement of the whole fab automation systems, including AGV fleets, Overhead Hoist Transport (OHT), Smart Inventory, robotics, and other related automation technologies within the Optical Module Department. In this role, you will collaborate with automation vendors and cross-functional teams to configure, test, validate, and maintain automated material handling systems, equipment interfaces, and hardware-to-tool communications, ensuring reliable operation, high system uptime, smooth production ramp-up, and effective training for operations and maintenance personnel. Job Duties Oversee preventive maintenance, wheel/drive calibration, mechanical troubleshooting, battery health management, and emergency repairs on OHT, AGV vehicles, automated charging docks, and other automated systems. Develop comprehensive training programs and lead hands-on technical...

Summary We are seeking a Production Engineer - Mechanical/Robotic to support new production line setups and equipment qualifications. In this role, you will work on configuring, testing, and validating automated machinery and processes to ensure smooth ramp-up and readiness for mass production. Job Duties Plan and execute production line setup, ensuring equipment readiness for pilot and mass production. Troubleshoot mechanical, process, or equipment-related issues and drive root-cause corrective actions ensuring the yield stability and improvement. Develop and maintain SOPs, Work Instructions, and training materials for production processes. Perform and document FAT/SAT (Site Acceptance Test) for new or transferred equipment. Work with R&D teams to integrate new processes for new products and implement to production lines. Support floor layout design and process flow optimization to improve efficiency and safety. Provide feedback to mechanical design...

Summary We are seeking a highly skilled Equipment Engineer to maintain and optimize the performance and reliability of our production line equipment. This role is crucial in reducing equipment downtime, boosting productivity, and ensuring the seamless operation of our automated systems. The Equipment Engineer will collaborate extensively with other engineering team members to uphold a consistent and efficient production line. Job Duties Equipment Management: Oversee and rectify deviations in equipment performance, specializing in troubleshooting and repair of production machinery, including both automated and semi-automated equipment. Compliance Assurance: Ensure that all equipment adheres to functional specifications, industry standards, and regulatory requirements. Maintenance Scheduling: Organize and execute regular calibration and preventive maintenance schedules for newly introduced production equipment. Equipment Oversight: Monitor the operational...

The Facilities Engineer acts as a project manager for construction, renovation, FMP (factory master plan) initiatives. This role is heavily loaded with CAD work, maintaining the plant masters, and site facilities document control. Acts as a data and site systems expert as that supports a huge range of department initiatives. Meeting and proposal work including note taking and presentation work. Also, project documentation for justification that leads to capital CAR and expensed project approvals. Position Responsibilities may include; • Oversee day-to-day operation of building systems (HVAC, electrical, plumbing, fire/life safety, and utilities) • Troubleshoot system issues and implement corrective actions to minimize downtime • Support critical equipment uptime and reliability objectives • Develop and optimize preventive and predictive maintenance programs • Analyze maintenance data to identify trends and improve asset performance • Support root cause analysis (RCA) and...

The FE Technician acts in support of the Facilities Engineers in completing projects in many roles. After being given general instructions the FE Tech must be self-managed in accomplishing all dictated tasks. There will be heavy recon work in/on the site, plant, and office. As in vetting CAD drawings dimensions and accuracy, moving materials with a forklift or pallet jack, vertical lift work, light assembly of fixtures and furniture. Meeting and proposal work including note taking and presentation work. Also, some small projects will be given to this role as a growth vehicle. Position Responsibilities may include; • Perform routine maintenance and inspections on building systems (HVAC, electrical, plumbing, and utilities) • Respond to work orders and troubleshoot basic-to-intermediate system issues • Escalate complex problems to Facilities Engineers or senior technicians • Support equipment uptime and assist with minimizing operational disruptions • Execute preventive and...

The Engineering Supervisor is responsible for the continuous improvement of manufacturing processes, fabrication and assembly, cost reduction initiatives, processing of engineering changes, and introduction of new products. Also provides leadership, guidance and mentoring to junior engineers, technicians and operations support staff. The Engineering Supervisor is responsible for achieving short and long-term goals, development of project plans, execution of capital projects and significant activities requiring a multi-functional team. Is a team player, results oriented, dedication to excellence and strong work ethics. Position Responsibilities may include: Establish continuous improvement goals and execute action plans Utilize proven lean manufacturing abilities to identify opportunities for cost reduction, increased quality, workflow improvements, estimating, project analysis, technology development and core manufacturing skill set. Able to supervise others and providing...

The Engineering Technician supports the Engineering department and production by creating and maintaining product specifications, bills of material, product change notifications and deviations. Responsible for developing and resolving technical problems in production, engineering, facilities and maintenance as it pertains to operational issues. Assist and support the operation of all equipment and processes within the facility, which includes facilities equipment, production equipment or engineering development / installation / repair of all equipment for production, facilities and maintenance of the plant. The purpose is to ensure equipment and processes are safely and efficiently operating to allow for high quality and on-time delivery of manufactured products. Position Responsibilities may include: Support production to resolve equipment, process and technical issues to maintain process in optimal state Provide daily support to assigned area for repairs, installations and...

The Mechanical Automation Engineering 3 position is part of the Production Engineering group that supports all areas of production and assembly in the factory. This includes sheet metal stamping, copper tubing, aluminum tubing, heat exchange coils, paint, plastics, material kitting, and assembly. The ideal candidate will have the necessary skills and have relevant experience with problem solving, collaboration, strong design skills and hands on mechanical aptitude. The Mechanical Automation Engineer 3is responsible for conceptualizing, specifying, designing, ordering, and programming automation equipment with a focus on robotics. Also provides guidance and mentoring to junior engineers, technicians, and operations support staff. Capable of managing project plans, executing capital projects, and activities requiring multi-functional teams. Position Responsibilities May Include: Develop equipment specifications and cost breakdowns for industrial automation equipment. Design...

About ITT: ITT Inc. (NYSE: ITT) is a diversified global leading manufacturer of highly engineered critical components and customized technology solutions serving the flow, aerospace and defense, transportation, industrial, and energy markets. Through operational execution, innovation, and disciplined capital deployment, including strategic acquisitions such as SPX FLOW, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Headquartered in Stamford, Connecticut, ITT has a market cap of roughly $20 billion and employs more than 15,000 people across 40 countries and serves customers in approximately 125 countries. Following the acquisition of SPX FLOW, the company is expected to generate $5.4 billion in annual revenue. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Flow Technologies: A global leader in, providing a broad portfolio of pumps, valves, mixing...

About the Company The company is a leading provider of integrated facility solutions dedicated to making buildings more energy-efficient, sustainable, and cost-effective. Through innovative HVAC engineering, electrical upgrades, building automation systems, preventative maintenance, and energy optimization, the company helps commercial and institutional clients reduce operating costs while improving building performance and environmental impact. About the Position Our client is seeking an experienced Senior Mechanical Engineer to lead the design and engineering of complex HVAC systems, boiler plants, and chiller plants for commercial and institutional facilities. This is an excellent opportunity for a technically strong engineer who enjoys solving challenging engineering problems, mentoring junior staff, and collaborating with multidisciplinary teams throughout the entire project lifecycle-from conceptual design through construction. The Senior Mechanical Engineer will...

Strong experience in P&ID/PFD interpretation, engineering drawings, and asset hierarchy modeling. Hands-on expertise with tools such as AutoCAD and AVEVA is required. Strong technical capability and adaptability

Summary: At Aquatech, we tackle the challenges of water scarcity and complexity by leveraging technology, expertise, and financing to deliver comprehensive solutions that reduce carbon and recycled water footprint. As a leading global provider of water and process technology solutions, we help the world's most recognized companies achieve their sustainability and operational goals by implementing innovative approaches for water reuse, desalination, minimal and zero liquid discharge, and critical minerals recovery. Our work catalyzes the transition toward a more sustainable future and showcases our commitment to addressing water's role in climate adaptation. Learn more atwww.aquatech.com Aquatech has an immediate need for a full-time Project Engineer to work in our Houston, TX office. The hours are Monday - Friday 8:00 am to 5:00 pm. The Project Engineer will report to the Project Manager and will perform the duties described in the job description below and will be considered an...

The Production Engineer 4 is responsible for the continuous improvement of manufacturing processes, fabrication and assembly, cost reduction initiatives, processing of engineering changes, and introduction of new products. Also provides guidance and mentoring to junior engineers, technicians and operations support staff. Capable of development of project plans, execution of capital projects and significant activities requiring a multi-functional team. The Production Engineer (PE) is a team player, results oriented, dedicated to excellence and strong work ethics. Position Responsibilities may include: Establish continuous improvement goals and execute action plans. Utilize proven lean manufacturing abilities to identify opportunities for cost reduction, increased quality, workflow improvements, estimating, project analysis, technology development and core manufacturing skill set. Develop and support DOE (Design of experiments), 8D (Eight Disciplines of team-oriented...

JOB FUNCTION : Improve and support CTO process and production facility/equipment for Sun server products. ROLES & RESPONSIBILITIES: Create/maintain production line layout. Order/maintain production line equipment. Co-ordinate process improvement projects. Work with PMs on quarterly capacity analyses (via time studies, takt time analysis, throughput, etc.). Support customer requests and assist with tours/audits of the production line. EDUCATION REQUIREMENTS : Requires a Bachelor's degree in engineering EXPERIENCE REQUIREMENTS : Min. 5 years experience in manufacturing environment - CTO and/or system integration experience is a plus. SPECIAL SKILL REQUIREMENTS : Knowledgeable on how to use layout creation software - i.e. AutoCAD, MS Visio, etc. Basic understanding of CTO process and has knowledge/experience in manufacturing and system integration process. Strong communication skills are a requirement, since customer interaction will be needed. Sun server...

Build Your Future at NWPX At NWPX Infrastructure, we manufacture welded steel pipe and precast products that form the backbone of America's water infrastructure. It's work you can be proud of-and an opportunity to advance your career with a company committed to your professional growth and well-being. Our brands-Northwest Pipe Company, NWPX Park, and NWPX Geneva-set the standard for safety, quality, innovation, and performance. Guided by our core values of Accountability, Commitment , and Teamwork , our people work collaboratively to deliver reliable products and trusted service to our customers-while building stable, rewarding careers along the way. For over 50 years, NWPX has been a leader in reliable water infrastructure solutions, and our people are the foundation of our success. Build your future with us and be part of a legacy grounded in water . WHAT NWPX OFFERS YOU: Medical, Dental, Vision, Life, AD&D Insurance Paid Vacation, Holidays, and Sick Time 401k...

About the Role Insight Surgery help surgeons plan the most complex surgeries, designing and manufacturing cutting edge patient-specific medical devices including anatomical models, surgical cutting guides and complex custom implants partnering with a number of large institutions across the USA and with the NHS in the UK. This is achieved by delivering a unique Point of Care service model. We are looking for a passionate Biomedical Engineer to join our growing team and help design patient-specific medical devices and surgical solutions. In this role, you will transform medical imaging data into custom surgical cutting and drilling guides, using planning tools that directly support surgeons and improve patient outcomes. You will work closely with surgeons, engineers and manufacturing teams to take patient-specific solutions from concept to delivery. This role is ideal for someone who enjoys solving complex anatomical challenges, working with cutting-edge 3D technologies and...

About the Role Insight Surgery help surgeons plan the most complex surgeries, designing and manufacturing cutting edge patient-specific medical devices including anatomical models, surgical cutting guides and complex custom implants partnering with a number of large institutions across the USA and with the NHS in the UK. This is achieved by delivering a unique Point of Care service model. We are looking for a passionate Senior Biomedical Engineer to join our growing team and help design patient-specific medical devices and surgical solutions. In this role, you will transform medical imaging data into custom surgical cutting and drilling guides, using planning tools that directly support surgeons and improve patient outcomes. You will work closely with surgeons, engineers and manufacturing teams to take patient-specific solutions from concept to delivery. This role is ideal for someone who enjoys solving complex anatomical challenges, working with cutting-edge 3D technologies...

Title: Mechanical Engineer Location: Houston, TX (77067) Duration: Permanent, Direct-Hire Work Requirements: US Citizen, GC Holders or Authorized to Work in the US. Key Points: Prior experience in hoisting equipment is a requirement for this role. This position is onsite daily in North Houston (77067) Job Summary: The Sr Mechanical Engineer (Drilling Equipment/Hoisting) for our client, is responsible for leading the mechanical design, analysis, and lifecycle support of drilling equipment and related systems. The engineer will drive product improvements, ensure design integrity, and support manufacturing, supply chain, operations, and field service teams throughout the equipment lifecycle. Responsibilities Product Design & Engineering Leadership Lead the mechanical design, modeling, and drafting of complex components and assemblies for drilling equipment (e.g., top drives, drawworks, handling tools, rotating...

Purpose of the position The Server Hardware Engineer is responsible for working with the customer to develop Server/Storage Electrical specifications and design, in cooperation with the Program manager, Mechanical Engineer, Thermal Engineer, Signal Integrity Test Group, BIOS, BMC and PCB Layout teams. Other validation teams may also be involved to develop and fully test server products from early development to production phases. Must be a good team-player, capable of working across multiple function teams to ensure successful delivery of products. Duties and Responsibilities Work with cross-functional teams (i.e. EE, BIOS, BMC, PA, SI) to Develop and deliver a successful server product to market Knowledge of Signal Integrity, eye diagram, transmission line and EMI in theory and in practical application Knowledge of Intel server MB, In-depth knowledge of x86 architecture Knowledge of Multi-phase VRM, high speed signal, (USB/SATA/SAS/QPI) and DDR4/DDR3 memory Use of...

Foxconn Industrial Internet (FII) provides innovative design and advanced manufacturing capabilities. FII centers around Cloud Based Computing, Big Data, High-Speed Networks, Automation, and Industry 4.0 methodology. Join an expansive network of professionals who work together within a company culture of one shared mission. FII is seeking a highly motivated Thermal Mechanical Engineer (or equivalent) with expertise in thermal and fluids engineering to contribute to the cooling of servers. As a part of the Server R&D team, the Thermal Mechanical Engineers utilize CAD software to address thermal challenges in support of server designs and technical proposals, review design work with customers and collaborate with multi-functional teams to optimize designs, validate design work, and release the products to volume manufacturing. Responsibilities: • Work on R&D, perform thermal solutions with specifications, analytical and computational analysis, designs and characterizations...