31 jobs found in Oklahoma City, OK

Description Position Title: Electrical Engineer Department/Location: Engineering/Oklahoma City, OK 73104 Supervisor: Engineering Division Manger Status: Regular/Full-Time Primary Function: This position is responsible for designing electrical systems by developing and testing specifications and methods. Essential Responsibilities: 1. Accessing and interpreting engineering drawings, technical orders, standards, and component specifications. 2. Identifying, analyzing, and providing solutions to technical issues. 3. Design, analyze, test, and document power system, conversion, distribution, or control systems products. 4. Assisting in test efforts. 5. Requirement definition, tracking, and resolution. 6. Technical data development, including instructions, plans, procedures, and reports. 7. Risk identification and tracking. 8. Perform design work within the bounds of a given budget and schedule. 9. Work as a member of a team to ensure work is complete...

Description Position Title: Mechanical Engineer Department/Location: Engineering/Oklahoma City, OK 73104 Supervisor: Engineering Division Manger Status: Regular/Full-Time Primary Function: This position is responsible for designing mechanical systems by developing and testing specifications and methods. Essential Responsibilities: 1. Accessing and interpreting engineering drawings, technical orders, standards, and component specifications. 2. Identifying, analyzing, and providing solutions to technical issues. 3. Mechanical component or material identification and selection 4. Assisting in test efforts. 5. Requirement definition, tracking, and resolution. 6. Technical data development, including instructions, plans, procedures, and reports. 7. Risk identification and tracking. 8. Assistance in design development activities. 9. Work as a member of a team to ensure work is complete on time and accurate. 10. Must be able to communicate effectively in...

About the role You will design, validate, and industrialize electronics for robust wireless control products-covering schematic design, component selection, board bring-up, DFM/DFS, and compliance readiness. You'll partner closely with embedded, RF, mechanical, compliance, and manufacturing teams to move concepts to dependable products used in demanding environments. What you'll do Create mixed-signal schematics (MCUs, power, sensors, comms, HMI); guide PCB layout for signal integrity, thermal, and EMC. Drive prototype bring-up and verification; define test methods and fixtures; collaborate with software for board enablement and diagnostics. Engineer interfaces and system integration with receivers/transmitters, actuators, and safety-relevant I/O; collaborate on harnessing and enclosure considerations. Prepare design documentation (BOMs, specs, test reports); support EMC/EMI, environmental, and regulatory testing with compliance engineering. Participate in gated product...

OVERVIEW Merrick is seeking an experienced (8+ years) Structural Engineer to join our Energy, Manufacturing, and Bioprocessing Business Unit. This position entails supporting the design and retrofit of industrial sectors in the oil, gas, power, manufacturing and bioprocessing facilities. Responsibilities include analysis and detailed design of structural steel and concrete structures, performing engineering cost estimates, and working with other disciplines such as mechanical, and electrical group. The Structural Engineer will visit project sites to observe field conditions, evaluate design constraints, and resolve construction-related problems. This position is full-time and located in our Tulsa, OK office. A hybrid schedule will be supported. Typical annual pay range for this position is $105,000.00 - $135,000.00. Pay offered may vary depending on job related knowledge, skills, and experience. WHAT YOU'LL DO The Structural Engineer will be proficient in preparing...

Requisition ID: 71110 About Whirlpool Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As theonly major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. This role in summary Whirlpool is currently seeking qualified candidates for an Industrial Engineer. This is an onsite role at our Tulsa, OK location. As an Industrial Engineer, you will be responsible for leading and driving change through the...

Reports To: Director, Product Development Located In: Tulsa, OK Cooperates With: Engineering, Product Management, Project Management, Field Service & Operations Brief Description: Responsible for development and integration of control systems solutions utilized by numerous products in the MIRATECH catalog. These products include integrated mechanical, electrical, and chemical systems which reduce harmful emissions from stationary pollution sources. This role supports the planning and execution necessary to develop, validate, launch, and support products for this market space. Primary Duties and Responsibilities: Design, program, and validate code and visualizations for various control systems (PLC, HMI, and embedded) Work strategically with key suppliers to select and integrate new or replacement hardware and instrumentation Engage with Marketing, Product Management, and Sales to provide superior products and customer experiences Collaborate with Engineering,...

Controls Engineer - South Tulsa, OK (Onsite, Direct Hire) Join a growing, industry-leading manufacturing company known for innovative, high-quality engineered systems. This role focuses on designing, programming, and commissioning control systems for automated equipment. Key needs: 4+ years of controls/automation experience Strong PLC programming (Allen-Bradley ControlLogix) Experience with HMIs, VFDs, and instrumentation AutoCAD for electrical drawings/updates Background with automated machinery (packaging, food processing, etc.) Key Responsibilities Design and develop control systems for engineered equipment packages Program and modify PLCs, HMIs, and other automation components Support system testing, commissioning, and startup activities Work closely with customers to refine and tailor technical solutions Interpret and update electrical drawings using AutoCAD Ensure high-quality standards and performance across all...

Reports to: Director of Project Engineering Located in: Tulsa Cooperates with: Engineering, Sales, Production, Project Management Primary Responsibility: We are seeking a highly skilled and detail-oriented Project Engineer III to join our team. The Project Engineer III works at the intersection of sales and engineering, helping our clients understand and implement our products and solutions. You will communicate face to face with our sales staff and customers to identify project needs and provide advanced technical support through the sales process. At this level, the Project Engineer III designs solutions for complex applications, serves as a senior technical resource, and works with a high degree of independence while contributing to cross-functional technical leadership. What You'll Do: Respond to customer inquiries regarding product specifications, features, and integration capabilities, including complex or custom applications. Communicate with and educate our...

Reports to: Director of Project Engineering Located in: Tulsa Cooperates with: Engineering, Sales, Production, Project Management Primary Responsibility: We are seeking a motivated and detail-oriented Project Engineer II to join our team. The Project Engineer II works at the intersection of sales and engineering, helping our clients understand and implement our products and solutions. You will communicate face to face with our sales staff and customers to identify project needs and provide technical support through the sales process. At this level, the Project Engineer II applies a broader knowledge of engineering principles, contributes to moderately complex projects, and works with increased independence in supporting both sales and project execution. What You'll Do: Respond to customer inquiries regarding product specifications, features, and integration capabilities Communicate with and educate our sales staff and customers on our technical solutions. Ensure...

Reports to: Director of Project Engineering Located in: Tulsa Cooperates with: Engineering, Sales, Production, Project Management Primary Responsibility: We are seeking an experienced and technically strong Senior Project Engineer to take the lead on complex, high-impact development and customer projects. This role operates at the intersection of sales, engineering, and operations, serving as a senior technical resource who guides solution design, supports strategic sales efforts, and ensures successful project execution. The Senior Project Engineer is capable of independently driving projects from concept through implementation, evaluating product functionality to fit customer needs, and troubleshooting challenging engineering problems. This position plays a key role in mentoring junior engineers, improving processes, and supporting the long-term scalability of MIRATECH's product portfolio. What You'll Do: Take the lead on high-level development projects, serving as...

Located in: Tulsa Reports to: Operational Engineering Manager Collaborates with: Engineering, Sales, Operations, Project Management Primary Responsibility: Application and technical support of MIRATECH product lines to sales staff that includes: direct and independent sales representatives, customers, vendors, and Operations personnel. What You'll Do: Sizing and specifying custom products for applications. Use engineering principles to analyze and design custom products. Technical lead on assigned projects. Generating sales and fabrication drawings as well as developing cost estimates to sales for quoting specialized products. Provide fabrication support for assigned projects. Installation and troubleshooting service work for products in the field. Create tools for engineering personnel to increase efficiency in day-to-day activities. Other duties as assigned. What Qualifies You: Bachelor's degree in an engineering discipline; Mechanical preferred. Must...

We've determined which skillsets are most beneficial for this role. These skills are listed first below as the Must Haves and Nice to Haves our hiring team highly prefers. Below that you'll find the standard job description for this opportunity. Must Haves: Bachelor's degree in related Engineering/Science field and a minimum of 6 years of prior related experience, Or master's degree in progress in related Engineering/Science field and a minimum of 4 years of prior related experience, Or in lieu of a degree, a minimum of 10 years of prior related technical and project management experience Specific experience in electrical power distribution, generation or conversion equipment development preferred. Broad-based technical knowledge and experience to understand and evaluate design and development activity across the engineering functions. Preferred emphasis in Electrical Power Conversion Engineering and Systems Engineering experience highly desired. Strong experience in...

Important Notes: We've determined which skillsets are most beneficial for this role. These skills are listed first below as the Must Haves and Nice to Haves our hiring team highly prefers. Below that you'll find the standard job description for this opportunity. Must Haves: Bachelor of Science degree in Mechanical or Aerospace Engineering with a minimum of 5 years of prior related experience. or a Master of Science degree in Mechanical or Aerospace Engineering with a minimum of 3 years of prior relevant experience. Must have experience and/or training in mechanical engineering. Or in lieu of a degree, a minimum of 8 years of prior related experience. Nice to Haves: 4 + years' experience using 3-D CAD software tools in design function, SolidWorks and Inventor/AutoCAD, or equivalent modeling software (solid modeler) experience a must. 2+ years of experience in military and/or industry specifications and standards pertaining to design, testing, hardware,...

AMETEK MRO is seeking an Aircraft Systems Test Engineer responsible for the development, modification, and test of a wide variety of electronic systems, electromechanical aircraft systems, including electric motors, generators, actuators, and integrated aircraft subsystems, with supporting exposure to hydraulic, pneumatic, and fuel systems.This role is a growth-focused engineering position, supporting New Product Development (NPD), reverse engineering, and capability expansion across FAA Part 145 repair activities. The ideal candidate is a self-starter, capable of working autonomously in a fast-paced, flexible engineering environment, and experienced in supporting DER repairs and FAA certification activities.The Aircraft Systems Test Engineer will plan, implement, and support FAA Repair Station activities; apply engineering principles, theories, and industry practices to develop FAA-approved repair solutions; and participate across multiple aspects of the FAA FAR145 component repair...

We are seeking an experienced Process Quality Engineer II to support manufacturing excellence by transforming product design documentation into effective manufacturing processes and work instructions. This role plays a critical part in ensuring products are built efficiently, consistently, and in compliance with customer and industry quality requirements. This role requires full-time, on-site presence in Lewisville, Texas. Please note that remote candidates will not be considered, and relocation support is not available. The Process Quality Engineer is responsible for planning and developing manufacturing processes that achieve required quality levels and production yields. This role creates, documents, and implements procedures for assembly, inspection, and testing, while working closely with engineering, production, and quality teams to ensure customer requirements are met. What You'll Do Participate in Advanced Product Quality Planning (APQP) activities in...

Description Position Description: The Mechanical Design Engineer is responsible for the development and sustaining engineering of electronic hardware designs for power supplies and converters. Responsibilities Support the introduction of new products through mechanical design, development, evaluation and implementation. Assess fabrication processes and recommend material and vendor selections based on design criteria to achieve design goals and requirements. Perform mechanical and thermal load analysis for the design and test of products. Design and document mechanical hardware for electronic power supplies such as encasement components, functional electromechanical components, and product accessories. Design and document mechanical parts and assemblies used for manufacturing processing, inspection, testing, and packaging of power supplies and power supply components. Ownership for the generation and review of mechanical drawings and Bills of Materials for parts,...

Position Overview: We are seeking a Licensed Mechanical Engineer with expertise in HVAC and plumbing systems design for residential (multi-family) and commercial applications. The ideal candidate will bring a strong technical background, excellent project management skills, and a commitment to creating energy-efficient, code-compliant designs. This role will involve leading mechanical design efforts, collaborating with multidisciplinary teams, and ensuring successful project delivery. Key Responsibilities: • Mechanical System Design: Design HVAC systems, including heating, cooling, ventilation, and energy management systems for residential and commercial buildings. • Plumbing System Design: Develop detailed designs for plumbing systems, including domestic water, sanitary drainage, vent systems, storm drainage, and gas distribution. • Code Compliance: Ensure all designs meet applicable codes and standards, including IMC, ASHRAE, IPC, and local requirements. • Load...

Job Description Position Title: Site Engineer II Your role The Site Engineer II position is a contributing member to the site level Data Center Operations team assigned to one or more of our data center properties reporting directly to the Manager Engineering Operations. The Site Engineer II will have experience in mission critical infrastructure, including Generators, UPS Systems, HVAC Systems, Fire/Life Safety Systems, BMS Systems, and CMMS systems. It is expected that the Site Engineer I candidate has expertise in either electrical work or mechanical work and it would be expected that he/she would be competent in the area of non expertise. The responsibilities of the Site Engineer II are: to contribute to the daily site operation, including creation and modification of site operating procedures, contribute to creation of change management tickets, creation of timely incident reporting, site maintenance and repairs/inspections to help ensure Digital Realty's data center...

Landmark is a leading provider of engineering, construction, and asset management services for storage solutions in the water, wastewater, power, and industrial markets. We operate throughout North American and have built our reputation on delivering the most challenging projects with a high degree of efficiency and precision. Challenging the norm and innovating better methods is core to our approach. Job Summary The Structural Engineer plays a hands-on role in designing elevated tanks and related structures, working closely with engineering, drafting, and field teams to deliver solutions that are both structurally sound and constructable in the field. This role spans from early concept through final construction, applying engineering fundamentals to large-scale structures where design decisions directly impact how the work is built in the field. Essential Duties and Responsibilities: Provide engineering for large capacity, field erected storage tanks. Analyze/design...

The Rohde & Schwarz Texas Production and Integration Center produces custom-integrated RF systems as well as products for various government programs. We deliver turnkey RF solutions to various customers ranging from the commercial market to the aerospace and defense sectors. Our systems are integrated into a wide variety of solutions including EMC anechoic test chambers, vehicles, and ranges. We are looking for a talented Manufacturing Engineer to join our world-class operations team and contribute to the continued delivery of these high-quality products. The Manufacturing Engineer will be a key driver in optimizing our production processes for RF racking, cabling, and support systems. This role focuses on developing and maintaining standard work, improving facility layout, and implementing continuous improvement initiatives using LEAN methodologies. The ideal candidate will possess a strong understanding of manufacturing engineering principles and a proactive approach to...