14 electronics design engineer jobs found

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position Overview Saronic Technologies is seeking a Senior Electrical Engineer specializing in ruggedized computing and networking systems to join our Electrical Engineering - Advanced Development group. This role will focus on the research, evaluation, and development of robust onboard computing architectures, embedded systems, and high-reliability network solutions that power Saronic's autonomous vessel platforms. The ideal candidate will have deep experience designing and validating ruggedized electronic systems for mission-critical applications, including embedded computing, network topologies, data management, and environmental hardening for commercial maritime and defense use cases. This position bridges R&D, systems engineering, and hands-on integration - supporting...

JOB SUMMARY: We are seeking a highly motivated Mechanical Engineer to join our PCBA (Printed Circuit Board Assembly) engineering team. This role is ideal for recent graduates or early-career professionals eager to build technical expertise in manufacturing and process engineering. You will receive structured on-the-job training and mentorship as you support the development, optimization, and maintenance of mechanical processes for high-quality electronic assemblies. RESPONSIBILITIES: Assist in developing and implementing manufacturing process instructions (MPI). Support the design and optimization of mechanical tooling and fixtures for PCBA assembly. Participate in process flow analysis to improve efficiency and manufacturability. Conduct basic Design for Manufacturability (DFM) assessments. Support failure analysis and troubleshooting under guidance from senior engineers. Assist document and update standard operating procedures (SOPs). Collaborate with...

Toshiba International Corporation (TIC) is a Toshiba America Group (TAG) Company, a wholly owned subsidiary of Toshiba Corporation. Comprised of four in-house divisions, TIC is a global leader in motors and drives, power electronics, transmission and distribution systems, and other social infrastructure systems. TIC is committed to providing the utmost in quality products and services and strives to uphold Toshiba's worldwide commitment to innovative technology, superior quality, and unmatched reliability. Many of these products are designed, built and tested in our 1,000,000 square foot state-of-the-art manufacturing facility in Houston, TX. TIC has developed a totally integrated manufacturing process from research and development, design, engineering, production and manufacturing to after-market service and sales & marketing. Toshiba differentiates itself from its competitors through its commitment to quality and reliability. We build products to perform in the most difficult...

Purpose of the position The Server Hardware Engineer is responsible for working with the customer to develop Server/Storage Electrical specifications and design, in cooperation with the Program manager, Mechanical Engineer, Thermal Engineer, Signal Integrity Test Group, BIOS, BMC and PCB Layout teams. Other validation teams may also be involved to develop and fully test server products from early development to production phases. Must be a good team-player, capable of working across multiple function teams to ensure successful delivery of products. Duties and Responsibilities Work with cross-functional teams (i.e. EE, BIOS, BMC, PA, SI) to Develop and deliver a successful server product to market Knowledge of Signal Integrity, eye diagram, transmission line and EMI in theory and in practical application Knowledge of Intel server MB, In-depth knowledge of x86 architecture Knowledge of Multi-phase VRM, high speed signal, (USB/SATA/SAS/QPI) and DDR4/DDR3 memory Use of...

Job Summary The Mechanical Product Engineer is responsible for the design, development, validation, and sustaining of mechanical aspects of high-technology electronic products from concept through mass production. This role works cross-functionally with electrical, manufacturing, quality, and supply chain teams to ensure products meet performance, reliability, cost, and manufacturability requirements in a high-volume manufacturing environment. Key Responsibilities Product Design & Development Design and develop mechanical components and assemblies for electronic products (enclosures, chassis, thermal solutions, brackets, connectors, etc.). Create 3D models, detailed drawings, and specifications using CAD tools. Perform tolerance analysis, material selection, and mechanical simulations (thermal, structural, vibration). Manufacturing & Industrialization Support NPI (New Product Introduction) from prototype through ramp to mass production. Collaborate with...

Kinetic provides high-speed broadband Internet, phone service, and Digital TV packages to residential customers as well as products and services for small, medium, and large businesses, and government agencies. www.GoKinetic.com About This Role: Kinetics' team of Outside Plant Engineers connects consumer and small business partners to our leading telecommunications products across the United States. In this role you will work to create meaningful connections with customers and build long-term relationships. By analyzing a variety of data, you will solve complex problems for our business and residential customers utilizing copper cable, fiber cable, and electronics. What You'll Do: Engineer/design outside plant facilities including fiber and copper Assist in the planning, analysis, design and engineering of outside plant network structures and facilities Organize complex activities for the development, construction, implementation, and maintenance of outside plant...

Saronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Position Overview Saronic Technologies is seeking a Senior Electrical Engineer with expertise in maritime acoustic sensor systems to join our Electrical Engineering - Advanced Development group. This role focuses on the research, evaluation, and development of underwater acoustic sensing technologies - including sonar transducers, hydrophones, acoustic modems, and signal processing subsystems - supporting navigation, detection, and situational awareness capabilities for autonomous surface vessels. The ideal candidate has extensive experience in acoustic system design, integration, and testing within marine or defense environments, and a strong background in hardware evaluation, data analysis, and system trade studies. This position...

Saronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Position Overview Saronic Technologies is seeking a Senior Electrical Engineer to drive research and development efforts in navigation and positioning technologies for autonomous marine systems. This individual will be responsible for evaluating, benchmarking, and integrating cutting-edge navigation and sensor technologies - including GNSS, IMUs, FOGs, LRGs, LiDARs, and supplemental sensing electronics - across Saronic's fleet of autonomous vessels. This is a hands-on, technically focused role with a strong analytical and experimental component. The ideal candidate brings deep experience in electrical systems design, system-level trade studies, and technology evaluation, and thrives at the intersection of hardware innovation and applied...

Toshiba International Corporation is a world leader in the design and manufacture of motors, motor controls and power electronics products. Many of these products are designed, built and tested in our 1,000,000 square foot state-of-the-art manufacturing facility in Houston, TX. We have developed a totally integrated manufacturing process from research and development, design, engineering, production and manufacturing to after-market service and sales & marketing. Toshiba differentiates itself from its competitors through its commitment to quality and reliability. We build products to perform in the most difficult conditions. From raw material to the finished product, we assure exacting quality, engineering excellence and stringent testing to meet domestic and international performance standards. Job Summary: The NC Programmer, Industrial Engineer is responsible for writing and maintaining NC Programs for 30+ CNC machines. They are responsible for implementing the latest...

Overview Keysight is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do. Our award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. Responsibilities Keysight-CSG Visibility Solutions is looking for a Mechanical Design Engineer Intern to contribute to our high speed and complex designs. Candidates joining our team will have great impact and help drive success, by collaborating and participating in new...

Foxconn Industrial Internet (FII) provides innovative design and advanced manufacturing capabilities. FII centers around Cloud Based Computing, Big Data, High-Speed Networks, Automation, and Industry 4.0 methodology. Join an expansive network of professionals who work together within a company culture of one shared mission. FII is seeking a highly motivated Thermal Mechanical Engineer (or equivalent) with expertise in thermal and fluids engineering to contribute to the cooling of servers. As a part of the Server R&D team, the Thermal Mechanical Engineers utilize CAD software to address thermal challenges in support of server designs and technical proposals, review design work with customers and collaborate with multi-functional teams to optimize designs, validate design work, and release the products to volume manufacturing. Responsibilities: • Work on R&D, perform thermal solutions with specifications, analytical and computational analysis, designs and characterizations...

Toshiba International Corporation (TIC) is a Toshiba America Group (TAG) Company, a wholly owned subsidiary of Toshiba Corporation. Comprised of four in-house divisions, TIC is a global leader in motors and drives, power electronics, transmission and distribution systems, and other social infrastructure systems. TIC is committed to providing the utmost in quality products and services and strives to uphold Toshiba's worldwide commitment to innovative technology, superior quality, and unmatched reliability. Many of these products are designed, built and tested in our 1,000,000 square foot state-of-the-art manufacturing facility in Houston, TX. TIC has developed a totally integrated manufacturing process from research and development, design, engineering, production and manufacturing to after-market service and sales & marketing. Toshiba differentiates itself from its competitors through its commitment to quality and reliability. We build products to perform in the most difficult...

JOB FUNCTION: Improve and support all FTX Process Engineering efforts for Electronic Products with focus in Capacity, Productivity and Quality Improvements. ROLES & RESPONSIBILITIES: Improve, support and coordinate all FTX Process and Quality Engineering efforts for Electronic Products & BOM attribute Implement ongoing process improvements of all operations to increase material flow, efficiencies, and balancing line throughput Implement ECOs/DEVs and prepare the documents accordingly Develop NPI process and perform DFX Perform cycle time and detailed line balancing of product build, test and pack Develop detailed work instructions / SOP Using computer skills to generate digital images of methods Provide equipment operation training to production Support facility layout and improvement projects Develop process and material flow charts Perform production short and long term capacity analysis Assist in the selection of new equipment for detrash, assembly and...

Saronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. We are seeking a highly skilled BuildEngineer to lead the build and integration effort for our maritime Autonomous Service Vessels. This highly cross functional role bridges design engineering and production teams setting up our products for success as we move from development to full rate production. Your focus will be on building high-quality, reliable vessels at scale by designing efficient production methods, integrating automation, and ensuring seamless assembly of structures, electronics, and vessel systems. Responsibilities Assist in the design, development, analysis, and construction of Autonomous surface vehicles (ASVs) Collaborate with other engineers to perform CAD modeling, structural/mechanical/electrical design, and...