13 design engineer electrical jobs found in Duluth

Job Summary Dennis Group's process engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Developing process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Preparing process flow and piping and instrumentation diagrams Create process flow diagrams Preparing mass and...

Overview Assist the Electrical Engineering department with the design,integration, and testing of electrical systems and wire harness on Cirrus aircraft and/or testbenches. Systems include power generation and distribution, and analog circuitdesign. Responsibilities Responsible for the design, testing, certification, and ongoing engineering support of various aspects of aircraft electrical systems such as power generation and storage, power distribution, wire harness design, etc. Develop and maintain electrical wiring diagrams andharness architecture to meet aircraft system requirements (e.g. functionality,electrical loading, and circuit protection,electromagnetic compatibility, and routing constraints). Design,drafting, and review of electrical equipment assemblies, enclosures, electricalwiring 3D models, part drawings, assembly drawings, and installation drawingsfor aircraft electrical and avionics systems, including power distribution, RF,and data busses. Selection...

Our employee-owned, multi-disciplined team of engineering and design professionals is looking for a Senior Professional Electrical Engineer with deep expertise in technical design standards for industrial facility and site electrical systems. You'll work alongside Architectural, Civil, Mechanical, and Structural professionals on a wide range of industrial projects across the country. In this role, you'll scope and lead the electrical engineering side of projects, developing site plans, power/signal/lighting plans, equipment layouts, one-lines, industrial controls, assessments, and reports. You'll also support construction administration, interpreting plans, observing construction, and confirming everything conforms to plans, specs, and schedule. With your experience, you'll also have the chance to mentor less experienced team members and help develop the next generation of engineers on our team. You'll lead engineering and design teams, owning the technical, quality, financial,...

We are seeking an Engineering Technician (Electrical) to join our Energy & Industry Team in our Duluth or Minneapolis, MN office. Why Choose LHB? Long-term Career Growth: We are dedicated to your long-term success. With a supportive training curriculum and clear paths for advancement, your career with us has widespread potential. Stability and Support: Join a respected company with a powerful reputation and a proven history in multifaceted infrastructure design. Enjoy a stable work environment where your contributions are valued, and your success is supported every step of the way. Competitive Compensation and Benefits: Enjoy a competitive salary, comprehensive health benefits, a retirement plan, paid time off, and more. Position Summary The responsibilities for this position will include but are not limited to: Work amongst a team of design engineers and technicians within our electrical discipline to process drawing redlines/comments and update...

Salary: $ 125,000.00 We have partnered with a large engineering services company in the Atlanta, GA area to provide them with a Senior Mechanical Engineer. Please review the description below and let us know if you are interested. Prioritized Must Have Skills for the Senior Mechanical Engineer: #1. BS in Mechanical Engineering #2. Active Mechanical PE #3. 10-15 years consulting engineering experience #4. HVAC and plumbing system design #5. AutoCAD, Revit, and HVAC load calculation software Responsibilities of the Senior Mechanical Engineer: The client is seeking a Senior Mechanical Engineer with a ten to fifteen years of experience. The ideal candidate will be a self-motivated team player looking for a challenging and rewarding opportunity within a dynamic and progressive firm. The successful individual will work closely with our business development team and other discipline leads in developing technical proposals and will take a proactive role in...

Overview Assist the Electrical Engineering department with the design, integration, and testing of electrical systems and wire harness on Cirrus aircraft and/or test benches. Systems include power generation and distribution, and analog circuit design. Responsibilities Responsible for the design, testing, certification, and ongoing engineering support of various aspects of aircraft electrical systems such as power generation and storage, power distribution, wire harness design, etc. Develop and maintain electrical wiring diagrams and harness architecture to meet aircraft system requirements (e.g. functionality, electrical loading, and circuit protection, electromagnetic compatibility, and routing constraints). Design, drafting, and review of electrical equipment assemblies, enclosures, electrical wiring 3D models, part drawings, assembly drawings, and installation drawings for aircraft electrical and avionics systems, including power distribution, RF, and data busses....

Overview Cirrus Aircraft is currently hiring a Staff Aircraft Systems Engineer focused on Powerplant Systems. An engineer in this role is responsible for design, development, integration, and certification with engine and/or propeller manufacturers along with systems such as fire extinguishing, fire detection, engine controls, engine indications, powerplant cooling, fuel systems, induction, and exhaust on both the SR and SF platforms as well as new projects. Candidates will also be responsible for coordinating development and system integration work with subcontractors and external suppliers. Responsibilities Interface with other aircraft disciplines, including structural and electrical disciplines, across the Cirrus Aircraft platform Work with a multi-discipline team on powerplant system design development. Identify, select, and coordinate with component and system suppliers Active involvement in development and certification of powerplant systems under FAR Part 23,...

Overview Cirrus Aircraft is currently hiring an Aircraft Systems Engineer II focused on Powerplant Systems. An engineer in this role is responsible for design, development, integration, and certification with engine and/or propeller manufacturers along with systems such as fire extinguishing, fire detection, engine controls, engine indications, powerplant cooling, fuel systems, induction, and exhaust on both the SR and SF platforms as well as new projects. Candidates will also be responsible for coordinating development and system integration work with subcontractors and external suppliers. Responsibilities Interface with other aircraft disciplines, including structural and electrical disciplines, across the Cirrus Aircraft platform Work with a multi-discipline team on powerplant system design development. Identify, select, and coordinate with component and system suppliers Active involvement in development and certification of powerplant systems under FAR Part 23, Part...

Overview Responsible for the continued electrical systems development and design for FAA certified single engine aircraft. Perform detail design and analysis activity conducted in the area of electrical systems design and integration. Responsibilities Responsible for the design, testing, certification, and ongoing engineering support of various aspects of aircraft electrical systems such as power generation and storage, power distribution, wire harness design, etc. Lead small teams of electrical engineers on complex projects. Mentor junior electrical engineers technically. Support mechanical and avionics systems with electrical integration details, including circuit design and analysis and electromagnetic effects/radiated field analysis and troubleshooting. Coordinate design development and system integration with subcontractors. Generate certification plans and reports to meet FAR Part 23 requirements. Qualifications Bachelor's degree in electrical or computer...

Overview The AD&D Engineer Principal Sr. - Future Flight Decks is a forward-thinking engineering leader responsible for driving the early-stage development of intelligent, automated aircraft systems within the Cirrus Advanced Design and Development (AD&D) team. This position will lead the technical work to explore and develop new philosophies and design concepts related to simplified vehicle operations - including new flight deck technologies, advanced display and software features, and next generation control architectures. This role will be a key pillar of the AD&D team will own the maturation of new ideas into validated concepts, and is focused on the initial phases of aircraft development-ideation, hypothesis generation, stakeholder engagement, technology maturation, and conceptual design. The successful candidate for this role will be a balanced future-minded pilot, avionics, human factors, and concept prototyping engineer. Responsibilities Take full...

Job Type Full-time Description From schools and healthcare facilities to commercial and industrial spaces, the work you do will help create environments that serve communities for years to come. As an Electrical Engineer at Widseth, you'll work on diverse building projects, collaborate with talented professionals across disciplines, and see your designs become reality from initial concept through construction. We're looking for an engineer who enjoys solving complex building design challenges, collaborating with multidisciplinary teams, and delivering practical solutions that make a lasting impact. Whether you're developing power distribution systems, designing energy-efficient lighting, or coordinating with architects and clients, you'll have the opportunity to contribute to meaningful projects. At Widseth, you'll work alongside experienced professionals, build strong client relationships, and help create spaces that strengthen our communities. What You'll Do Design...

Overview Responsible for leading the design, development, integration, and certification with engine and/or propeller manufacturers along with systems such as fire extinguishing, fire detection, engine controls, engine indications, powerplant cooling, fuel systems, induction, and exhaust on both the SR and SF platforms as well as new projects. Direct reports include individual contributors and range from 10-20 engineers and/or designers of varying experience. Candidates will also be responsible for coordinating and leading development and system integration work with subcontractors and external suppliers. Responsibilities Interface with other aircraft disciplines, including structural and electrical disciplines, along with engineering flight test, airworthiness and experimental, across the Cirrus Aircraft platform. Work with a multi-discipline team on propulsion system design development. Identify, select, and coordinate with component and system suppliers. Active...

Duluth, GA (Onsite) | Aerospace & Avionics 9/80 Schedule Available - Every Other Friday Off Lead the Engineering Behind What Protects, Connects, and Displays Avionics Technology Great avionics performance depends on more than what happens inside the electronics. The mechanical packaging, thermal performance, structural integrity, PCB design, and optical systems all have to work together-and perform reliably in demanding flight environments. At Universal Avionics, we're looking for a Manager, Packaging and Optics who can lead both the people and the engineering behind these critical disciplines. This is an opportunity for an experienced mechanical engineering leader who wants to remain technically connected to the work while developing talented engineers, influencing product design, and helping bring sophisticated electronic and opto-mechanical systems from concept through qualification. The Opportunity Universal Avionics develops advanced avionics, enhanced vision...