12 electrical project engineer jobs found in Duluth

Job Summary The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash,...

The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Design electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Document all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state...

Job Summary Cirrus Aircraft is currently hiring an Aircraft Systems Engineer II focused on Powerplant Systems. An engineer in this role is responsible for design, development, integration, and certification with engine and/or propeller manufacturers along with systems such as fire extinguishing, fire detection, engine controls, engine indications, powerplant cooling, fuel systems, induction, and exhaust on both the SR and SF platforms as well as new projects. Candidates will also be responsible for coordinating development and system integration work with subcontractors and external suppliers. Duties and Responsibilities/Essential Functions Interface with other aircraft disciplines, including structural and electrical disciplines, across the Cirrus Aircraft platform Work with a multi-discipline team on powerplant system design development. Identify, select, and coordinate with component and system suppliers Active involvement in development and certification...

Job Summary The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Execute duties on larger projects independently Client contact and lead engineer Documenting all necessary...

Job Summary The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash,...

Job Summary Cirrus Aircraft is currently hiring an Aircraft Systems Engineer focused on Parachute Systems. An engineer in this role is responsible for design, development, integration, and certification with systems such as complex mechanisms, textiles, composites, and pressurized systems along with structural strength of these systems on both the SR and SF platforms as well as new projects. Candidates will also be responsible for coordinating and leading development and system integration work with subcontractors and external suppliers. Duties and Responsibilities/Essential Functions Technical areas of responsibility include: Requirements, Design, Traceability, and Installation of on-aircraft equipment working with multi-disciplinary team. Ensure system requirements comply with Part 23, ASTMs, and other regulatory, industry requirements, or MIL standards. Complete project assignments and takes responsibility for designs and design outcomes. Integration Test definition...

Job Summary Dennis Group's process engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Developing process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Preparing process flow and piping and instrumentation diagrams Create process flow diagrams Preparing mass and...

Job Summary Dennis Group's Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities. Specifically, HVAC, plumbing / utility, and fire suppression systems. Our mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Mechanical Engineers will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. You will be a member of our mechanical department and your responsibilities will include, but not be limited to: Responsibilities Works independently on projects Works several project simultaneously Execute all tasks necessary to complete the engineering on a project from design through execution Perform heating and cooling load...

Job Summary Dennis Group's process engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Execute all tasks necessary to complete the engineering on a project for design through execution with minimal support Developing process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects,...

Job Summary Dennis Group's process engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Execute all tasks necessary to complete the engineering on a project for design through execution with minimal support Developing process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects,...

Job Summary Cirrus Aircraft is currently hiring an Aircraft Systems Engineering Supervisor focused on Propulsion Systems. A supervisor in this role is responsible for design, development, integration, and certification with engine and/or propeller manufacturers along with systems such as fire extinguishing, fire detection, engine controls, engine indications, powerplant cooling, fuel systems, induction, and exhaust on the SR platform as well as new projects. Direct reports include individual contributors. Candidates will also be responsible for coordinating and leading development and system integration work with subcontractors and external suppliers. The size of the propulsion team ranges from 5-12 engineers and/or designers of varying experience. Duties and Responsibilities/Essential Functions Interface with other aircraft engineering functional disciplines, including structural and electrical disciplines, and across the Cirrus Aircraft product platforms and programs....

Job Summary Responsible for the continued electrical systems development and design for FAA certified single engine aircraft. Perform detail design and analysis activity conducted in the area of electrical systems design and integration. Duties and Responsibilities/Essential Functions Responsible for the design, testing, certification, and ongoing engineering support of various aspects of aircraft electrical systems such as power generation and storage, power distribution, wire harness design, etc. Lead small teams of electrical engineers on complex projects. Mentor junior electrical engineers. Support mechanical and avionics systems with electrical integration data, including circuit design and analysis, electromagnetic effects/radiated field analysis, and troubleshooting. Coordinate design development and system integration with subcontractors. Generate certification plans and reports to meet FAR Part 23 requirements. Qualifications To perform this job...