33 product engineer jobs found in Huntsville

Overview THE ROLE At Great Dane, we rely on makers and we're calling on them to join our expanding team, the time has never been better to Embrace Your Great and work in an environment with the highest safety standards in the industry. The position: Directly responsible for the development and implementation of capital projects and manufacturing processes. These positions also work closely with Plant and Branch Operations in order to anticipate and resolve issues. Responsibilities WHAT YOU'LL DO Key Responsibilities: Coordinates maintenance and repair services for plan locations. Follows manufacturer's instructions and established procedures, requesting special services as needed. Conducts plant visits to assist with project planning, process improvement and to maintain company assets. Provides manufacturing engineering information to customers. Responsible for capital expenditure program (budgeting, project planning and implementation). Develops cost...

TSC is seeking a Mechanical Engineer based in Huntsville, AL This position supports the Radar & Precision Weapons Development Operations. TSC Alabama Operation Highlights TSC's Radar and Precision Weapons Development Division provides products and services in the areas of radar, communication systems, sensors, antennas and other electronics systems to the missile, radar/sensor system, communications, control systems, data acquisition, and signal processing markets. The company has developed products ranging from chip-level, application-specific, integrated circuits (ASIC) to complete, turnkey radar and communication systems. TSC has established a state-of-the-art hardware capability that is well respected by customers in Government and Industry. TSC also provides full spectrum systems engineering support including theoretical analysis, requirements generation, interface control, and test planning/execution/data analysis. Responsibilities: This position requires a...

TSC is seeking a Entry Level Mechanical Engineer based in Huntsville, AL This position supports the Radar & Precision Weapons Development Operation. TSC Alabama Operation Highlights TSC's Radar and Precision Weapons Development Division provides products and services in the areas of radar, communication systems, sensors, antennas and other electronics systems to the missile, radar/sensor system, communications, control systems, data acquisition, and signal processing markets. The company has developed products ranging from chip-level, application-specific, integrated circuits (ASIC) to complete, turnkey radar and communication systems. TSC has established a state-of-the-art hardware capability that is well respected by customers in Government and Industry. TSC also provides full spectrum systems engineering support including theoretical analysis, requirements generation, interface control, and test planning/execution/data analysis. Responsibilities: The Mechanical...

About the Job Must be willing to travel/temporarily relocate to Mobile, AL. What we offer: Paid Travel and lodging assistance available. Long and Short-Term Contracts. Immediate placement. PTO. Paid Holidays. Health Benefit. Position Summary: AAA United States, Inc. has partnered with a company in Mobile, Alabama that is an international pioneer in the aerospace industry. They are a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a global scale. A commercial aircraft manufacturer, with Space and Defense as well as Helicopters Divisions, they are the largest aeronautics and space company in Europe and a worldwide leader. The Manufacturing Engineer I is responsible for converting the build process plans into coherent step-by-step instructions that technicians can easily follow to build components and assemblies or install components into an aircraft structure. Essential Functions: Evaluates...

Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview A Mechanical Engineer 3 is responsible for designing, analyzing, and improving mechanical systems and components. Essential Functions Plan and perform engineering research, design, and development in conformance with design, engineering, and customer specifications Identify and document requirement through customer interface Create and review Mechanical CAD drawings and component layout designs Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc. Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost Conduct rapid prototyping (3D...

Torch Technologies Thank you for your interest in employment with Torch Technologies. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL. Our team provides superior research, development, and engineering services to the Federal Government and Department of War. As one of the nation's top 100 defense companies, the services we provide directly support the men and women who serve our country. Our corporate mission sums up the pride our employee-owners take in the work we do: "Lighting the Pathway of Freedom". And, as a Certified Evergreen ESOP, we have made the commitment to grow and sustain our company for the next 100 years! Come grow with us! Torch Technologies is seeking a Mechanical Engineer 3 to join a team supporting design efforts for multiple platforms including aviation, ground, and weapon systems. This position supports the design and evaluation of complex mechanical and...

Job Type Full-time Description The Equipment Engineer will be responsible for designing, developing, and testing new equipment and machinery. This role involves creating design schematics, maintenance schedules, and reports related to equipment training, specifications, and best practices. The position is pivotal in minimizing costs through product standardization and quality tracking, ensuring the equipment meets the demands of production processes. Train fellow engineers, technicians, operators, and other staff about equipment process Collaborate with other departments and external vendors to plan and implement projects and resolve issues. Research and evaluate solutions for cost-reduction and other opportunities to improve OEE. Troubleshoot equipment and processes. Create/modify documents to support manufacturing operations such as PM documents, work instructions, process specifications, etc. Work with maintenance to continuously improve equipment/process design, PM...

Job ID: 113562 The Leonardo DRS Land Electronics business provides C4I Network computing and integrated situational awareness, as well as state-of-the-art embedded diagnostics, vehicle power management and combat vehicle integration products and services. Job Summary Leonardo DRS Land Electronics delivers advanced components and mission-critical systems that close capability gaps across military platforms and networks-from embedded electronics and power solutions to field and sustainment-level diagnostic tools. Based in Huntsville, Alabama, our team operates from a newly constructed 131,500-square-foot facility, including a 24,000-square-foot vehicle integration building that supports hands-on work with several of the latest military vehicles. In this role, you'll support and participate in technical activities across the full product lifecycle-designing, developing, analyzing, documenting, and supporting the test of products, systems, and subsystems. With more than 60...

Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview A Mechanical Engineer 2 is responsible for designing, analyzing, and improving mechanical systems and components. Essential Functions Support the planning and performing engineering research, design, and development in conformance with design, engineering, and customer specifications Identify and document requirement through customer interface Create and review Mechanical CAD drawings and component layout designs Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc. Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost Support rapid prototyping (3D printing, composites, machined parts) and hands-on integration Assist with conducting...

Worker Type Regular Job Description Summary The Sr. Staff Mechanical Engineer applies engineering techniques to design, install, modify, analyze, repair and test tools, engines, machines and other mechanically functioning equipment. In this role, The Sr. Staff Mechanical Engineer leads in the mechanical design, testing, and production of electrical machines as well as the design of electronics packaging for high altitude aerospace applications. One leads the mechanical packaging development effort for electronic equipment that withstand stringent environmental requirements (i.e., mass, volume, thermal, vibration). Manages mid-size development projects outsourced to sub-contractors (development of a system, equipment or components). Position Responsibilities Leads or supports the thermal, structural, dynamic, and fluid flow analysis efforts for electronics equipment Leads the testing and data collection in the laboratory and the field Models the mechanical devices...

Manufacturing Engineer Company: Norris Cylinder Company Primary Location: 521 Green Cove Road SE, Huntsville, AL 35803 USA Employment Type: Salaried | Full-Time Function: Engineering Equal Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties & Responsibilities Job Summary :The Manufacturing Engineer has responsibility of day-to-day engineering duties on the plant floor to support production of high pressure gas cylinders.Primary role is to lead cost savings efforts, identifying new processes, equipment, or equipment improvements that will increase throughput, reduce manufacturing costs, and improve repeatable quality. Must track and justify savings as criteria for annual performance review. Position reports to Director of Operations. This role will work closely with Production, Quality, and Maintenance. Job Duties and Responsibilities include the following. Other duties may be assigned: Develops, evaluates, and drives improvement in methods and...

Company Overview Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs etc) leverage to achieve their targets. Electromagnetic and Cyber Group (EM&C) is responsible for developing flexible and survivable advanced electronic warfare and secure communications equipment while providing the industry's leading signals intelligence, electronic warfare, and cyber experts. Metrea specializes in signal classification, direction finding, advanced geolocation techniques, and waveform development including waveforms for...

Schwarze Industries (a member of Alamo Group Inc.) is currently accepting applications to fill an Sr Electrical Engineer position at its Huntsville, AL facility. Looking for candidates with 5 plus years of experience in electrical. Why work at Schwarze? At Schwarze, we strive to employ the most talented people in the industry. People who believe in getting the job done and those who take pride in what they do. We are dedicated to using a Total Performance Teamwork concept to produce, maintain, and market the finest, most durable, quality power sweeping equipment in the world. We offer one of the most comprehensive sweeper lines in the industry, including models for parking area cleaning, industrial sweeping, mall and shopping center sweeping, airport runway sweeping, street sweeping, milling cleanup and storm water runoff (PM-10) management. Schwarze offers competitive pay and a wide range of employee benefits including: Medical, Dental, and Vision Coverage 401(k) Retirement...

Huntsville, AL / Full-time / Civil Engineering Sain Associates is looking for a civil engineer who specializes in Civil/Site design to manage projects. In this role, you would be working closely with the design team to produce high quality engineered plans in Civil3D. On a typical day, you might run a project kick-off meeting, design the storm drainage and grading plans for new townhomes, and provide quality control checks. You would also mentor growing engineers, and coordinate weekly with other managers in the practice group. About the Team Our Site Practice Group is located in Birmingham and Huntsville, Alabama. They serve diverse markets including large industrial developments, office buildings, private commercial developments, municipal work, master-planned residential subdivisions, and airports. What we are looking for 7+ years of site design experience 3+ Project Management Experience Willingness to teach newer professionals Licensed Professional Engineer...

What We're Looking For: Barge Design Solutions, Inc. is seeking a driven Aviation Project Engineer to join our team in Nashville, TN or Huntsville, AL. In this role, you will contribute to the planning, design, and delivery of aviation infrastructure projects that enhance connectivity and support the growth of the communities we serve. You will collaborate with a multidisciplinary team of experienced engineers and industry professionals, gaining exposure to a wide range of airport and airfield projects. This position offers the opportunity to take ownership of key project components, strengthen your technical expertise, and play a meaningful role in delivering high-quality, client-focused solutions. If you are looking to advance your career in aviation engineering while making a tangible impact, Barge provides the platform to grow, lead, and succeed. Responsibilities Engineering design for airport projects to include runway, taxiway, access road, drainage improvement and...

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities, our diverse 750+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward- advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors OHM Advisors is seeking a Project Engineer to support and lead the delivery of site development and municipal infrastructure projects in our Huntsville and Mobile offices. This role offers the opportunity to contribute to meaningful projects that support the continued growth and...

This position will work between an office and manufacturing environment. No relocation package for this position. Candidate must provide own room and board. Under moderate supervision, updates, and assembles models and creates drawings in CAD software. Assists engineering team in creating product and process documentation. Creates and modifies item records, bills of materials, routes, and other setting in software system. Assist engineers with required engineering expertise to complete design activities. Assist with the development of layouts and design and/or modification in existing products, and information required for production use. Use engineering tools to analyze design to meet requirements for strength, noise, functionality, ergonomics, safety and quality. Assist with edits, updates, and assembling product manuals and customer support documentation. Updates and or create CAD layouts in Solid Works platform. Create and or update work instructions. Assist...

Mechanical Packaging Engineer-Lunar Avionics KODA is a people-first company and a three-time Fortune Best Workplace®, Great Place to Work® certified, a Best Place for Working Parents®, and a six-time Huntsville Best Places to Work® winner. We're a small business making a big impact on national-priority missions in missile defense, hypersonics, DoD space, and civil space . At KODA, you'll find: Competitive pay & great benefits Career growth & professional development A culture of trust, integrity, and teamwork The name KODA , meaning "allies," reflects our commitment to our people, our customers, and our community. Join us and build a career that matters! Position Overview: KODA Technologies is seeking a Mechanical Packaging Engineer to support our customer's lunar avionics program. The engineer will design, document, and release flight avionics enclosures and related hardware, incorporating printed circuit boards (PCBs), interconnects, and associated...

Worker Type Regular Job Description Summary The Systems Engineer III works with our Design team to develop a variety of innovative Unmanned Systems for defense and commercial applications. This position will interact with Controls Engineers to allocate requirements and develop architectures to drive simulation models. These development efforts will generally be small focused design teams, which will require engineers to use a range of skills and tools across traditional engineering, computer science, and mathematical disciplines. Because of the nature of the development efforts, the engineer will need to work on a variety of stages of development including requirements definition, concept design, prototyping, detailed design, validation and verification testing. Position Responsibilities Support providing weekly Status of System development progress with requirements burn down Support Allocating Requirements to Subsystems & Engineering coordination Support...

Mechanical Engineer/Technical Drawing, Junior Full Time, Huntsville, AL SECRET Referral Bonus: $1,000 Job Description: Semper Valens Solutions is looking for a Mechanical Engineer/Technical Drawing Technician. The successful CAD Drafting Engineer will provide onsite and remote support for multiple Force Protection System (FPS) Family of Systems (FOS) to the IBD-SS program. We are looking for motivated self-starters who want to join a team dedicated to excellence and continuous progress Responsibilities: Perform Solidworks modeling and drafting with knowledge of Geometric Dimensioning & Tolerancing (GD&T) Demonstrate a good understanding of engineering processes with a continuous process improvement mindset. Assist with all engineering BOM Development and maintenance. Maintain and create technical drawings, manufacturing schematics, and 2D and 3D digital models of mechanical equipment designs, using measurements and specifications all in...