767 design release engineer jobs found

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary We are seeking an experienced and passionate Senior Design Release Engineer (DRE) - Differentials to lead the differential requirements establishment, technical development, integration, and release of differential systems / technologies for our next-generation vehicles at Rivian. In this role, you will be the technical lead for differential technologies across multiple vehicle powertrain drive unit programs-spanning Open, Limited Slip...

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary This is an opportunity to have great impact and shape the physical design of Rivian's electric vehicle systems. We're looking for a highly motivated, multi-disciplined mechanical design & release engineer to help us design and develop Exterior components on current and future Rivian Models. Responsibilities • Design, Develop, and release Exterior Components including, but not limited to Front and Rear Fascia Assemblies, Front End Modules...

Position: Entry-Level Manufacturing Engineer Location: Albemarle, NC Type: Full-time | On-site Primary Function: Responsible for assisting in the development of manufacturing engineering specifications and special tooling and/or the modification of equipment used in the lean manufacturing process. Specific Duties: In conjunction with other technical staff members, develop value stream strategies of modified or new machines and equipment that will positively impact key business metrics of quality and cost; including the design or procurement and development of fixtures, machinery and/or tooling. Conduct kaizen activities to analyze work force utilization, space requirements, workflow, and design layout of equipment for maximum efficiency of cell manufacturing. Develop and implement lean strategies, which drive teams and projects, identify and eliminate waste, concentrate on set-up reduction, and implement solutions while tracking and communicating...

We are the global test and automation specialists, powering next-generation technologies through sophisticated solutions. Behind every electronic device you use, Teradyne's test technology ensures your device works right the first time, every time! Our portfolio of automation solutions help manufacturers to develop and deliver products quickly, efficiently and cost-effectively. Together, Teradyne companies deliver manufacturing automation across industries and applications around the world! We attract, develop, and retain a high-performance workforce, comprised of people with diverse backgrounds and a shared drive for excellence. We strive to foster a positive and inclusive work environment that helps employees, and communities, thrive. Our Purpose TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought in our workforce. Our employees are supported to innovate and learn something new every day....

Our Purpose TERADYNE, where experience meets innovation and drives excellence in every connection. We are fueled by creativity and diversity of thought across our workforce. Our employees are supported to innovate and learn something new every day. We cultivate a culture of inclusion that respects individual strengths, perspectives, and experiences-because better ideas come from stronger teams. Opportunity Overview As a Mechanical Engineer in Teradyne's Defense & Aerospace division, you will design and deliver custom electro-mechanical solutions for advanced test systems supporting mission-critical aerospace and defense applications. This role partners closely with cross-functional teams to translate customer needs into robust, manufacturable designs across new product introductions and existing platforms. Lead mechanical design of cables, ITAs, and custom test fixtures for automated test equipment Develop and release detailed CAD models, drawings, and documentation...

Our Purpose TERADYNE, where experience meets innovation and drives excellence in every connection. We are fueled by creativity and diversity of thought across our workforce. Our employees are supported to innovate and learn something new every day. We cultivate a culture of inclusion that respects individual strengths, perspectives, and experiences-because better ideas come from stronger teams. Opportunity Overview As a Mechanical Engineer in Teradyne's Defense & Aerospace division, you will design and deliver custom electro-mechanical solutions for advanced test systems supporting mission-critical aerospace and defense applications. This role partners closely with cross-functional teams to translate customer needs into robust, manufacturable designs across new product introductions and existing platforms. Lead mechanical design of cables, ITAs, and custom test fixtures for automated test equipment Develop and release detailed CAD models, drawings, and documentation...

Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Beckman Coulter Diagnostics, one of Danaher's 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. As a global leader in clinical diagnostics, Beckman Coulter Diagnostics has challenged convention to elevate the diagnostic laboratory's role in improving patient health for more than 90 years. Our diagnostic solutions are used in routine and complex clinical testing, and are used in hospitals, reference and research laboratories, and physician offices around the world. Every hour around the world, more than one million tests are run on Beckman Coulter...

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. Position Overview: You will lead the design, development, and validation of Polaris Powersports vehicle systems and components from concept through production. In this role, you will establish requirements and specifications, collaborate with program architects, product management, suppliers, and cross-functional engineering teams, and ensure solutions meet performance, quality, cost, and timing objectives. You will own subsystem development activities throughout the product development lifecycle, including design, validation, manufacturing support, and production implementation. This is a compelling opportunity to influence future vehicle...

RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking a growth-oriented candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will be onsite at our client's Pontiac, IL facility working with their fuel injector systems. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Product Development Engineer Support new product development initiatives within a mechanical engineering and product validation environment. This role will focus on product design, development, testing, problem-solving, and engineering analysis activities related to complex...

RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking engineers of all experience levels to join our engineering team. We work in many functional areas centered around the off-road heavy equipment industry. Additionally, we support most other industries including medical, power sports, lawn & garden and defense. Mechanical Design Engineer The mechanical design engineer is responsible for creating and developing innovative mechanical systems, products, and components. They collaborate with cross-functional teams, including other engineers, designers, and stakeholders, to design, analyze, and optimize mechanical solutions that meet project requirements and industry standards. This role involves using computer-aided design (CAD) software, simulations, and other tools to create detailed drawings, models, and prototypes. Responsibilities Design of mechanical...

Description SENIOR CONTROLS ENGINEER This position is based out of our Minneapolis, MN office. About ArchKey ArchKey is one of the nation's largest privately held specialty trade installation and integrated facility service companies. We are a leader in designing, building and maintaining electrical, technologies and specialty systems. We're the POWER behind making the improbable possible. We're electrifying the nation, energizing the future and bringing communities to life like never before. What we do today shapes the vision of tomorrow. Our work impacts lives long after the building is done. This means we are committed to building in ways that are not just technologically advanced, but sustainable, scalable and equitable by all. We're not just energizing infrastructure, we're energizing careers, communities, and the future. Made up of the brightest minds in the industry, our team is our greatest asset bringing knowledge, skills, and experience to every...

Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord office. The Design Engineer II is responsible for managing the integration, design, and development of brake and clutch products across a broad portfolio. This role provides technical support for refining and integrating products into the Regal Rexnord Business System (RBS). Typical projects focus on Value Analysis/Value Engineering (VAVE) initiatives and product improvements related to quality and cost. The Design Engineer II works closely with cross-functional teams within manufacturing and R&D and engages directly with customers to define application requirements and product utilization. Key Responsibilities Communicate and collaborate effectively with Design Engineering and cross-functional departments within the manufacturing plant and R&D lab. Manage technical ownership and content for the electro-mechanical brake product portfolio. Lead VAVE initiatives and product...

Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord office. The Manufacturing Design (MD) Engineer plays a key role in Portescap's Slotted Brushless DC motor product line, supporting applications in surgical hand tools, surgical robotics systems, aerospace, defense-related programs, and other industrial markets. This position leads manufacture process development to transition prototype motor designs into final production, including projects that may be subject to International Traffic in Arms Regulations (ITAR). The role partners with R&D design engineers to assess manufacturability and supports prototype builds. It also develops process flows and standard work documentation, leads the design and validation of new product tooling, fixtures, and equipment for successful preproduction execution. Essential Duties and Responsibilities Partner with design engineer team to ensure Design for Manufacturability and Assembly during concept...

At AMETEK, we don't just manufacture market-leading electronic instruments and electromechanical devices - we are using innovation to make the world a better place; technology to improve lives; and talent to solve challenges that matter. Job Summary: The Mechanical Engineer with Project Management & Product Development responsibilities will be tasked with leading the design, improvement, and project execution of AMETEK Solidstate Controls' (SCI) UPS and Battery Charger power sources, as well as the Bargraph indicator product line. This role leverages a mechanical engineering foundation to manage technical projects and orders, support new and existing product development, and ensure alignment with customer requirements, production needs, timelines, and business objectives. Working within a fast-paced production and manufacturing environment, the engineer collaborates cross-functionally with Manufacturing, Quality, Electrical Engineering, Sales, and Service to drive...

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. Position Overview: You will design, develop, validate, and release seating and occupant restraint systems for off-road vehicle platforms. In this role, you will support vehicle programs from concept through production while delivering solutions that meet requirements for comfort, safety, durability, quality, cost, weight, and timing. You will work closely with Industrial Design, Vehicle Architecture, Safety, Testing, Manufacturing, Quality, Purchasing, and suppliers to integrate seating and occupant retention systems into vehicle platforms. This is a compelling opportunity to own key vehicle systems that directly influence rider experience,...

Position Overview The Manufacturing Engineer leverages subject-matter expertise to execute critical project work and drive operational decisions. This role applies a deep understanding of manufacturing principles alongside company policies to resolve complex, moderate-scope issues. Working under limited supervision, the Engineer exercises strong judgment within standard practices, builds productive cross-functional relationships, and requires only general guidance on routine work and strategic direction on new initiatives. Schedule: 1st Shift, Monday through Thursday 5:30 PM - 4:00 PM , should be flexible to support special projects during weekends if needed. Responsibilities • Develops, implements and maintains methods, operation sequence, design and develop processes in the manufacturing floor and knowledge about fabrication of fixtures, jigs and other assembly aids. Should have knowledge about assembly of parts, components, sub assemblies and final assemblies, and...

Janicki Industries is an innovative, family-owned aerospace company located at the foot of the Cascades. We focus on engineering and manufacturing complex projects for companies in the aerospace, defense, and space industries. We are looking for a Project Engineer to join our growing team. This position is located on-site in Hamilton and Sedro Woolley, Washington State. POSITION DESCRIPTION Project Engineers are responsible for all activities that are carried out to successfully complete an assigned project. Activities may include interaction with customer and development of SOW, through design work, to manufacturing support. The following essential job functions are performed as a Project Engineer: Works directly with the customer and internal technical teams to ensure progress on all stages of project lifecycle Communicates, consults with, and participates in design and manufacturing support Helps to develop and release planning and purchases supplies Develops and...

Systems Manufacturing Engineer Full-Time | Manufacturing Engineering | Electrical Systems Focus Build Innovative Electro-Mechanical Systems That Make an Impact Are you a hands-on Manufacturing Engineer who enjoys solving real production challenges? We're looking for a Systems Manufacturing Engineer to join our Systems Manufacturing Group (SMG), supporting the production of complex electro-mechanical assemblies and systems. This is an ideal opportunity for an engineer who thrives on the manufacturing floor-not behind a desk. You'll work closely with technicians, quality, engineering, purchasing, and production leadership to troubleshoot systems, improve manufacturing processes, and help deliver high-quality products efficiently and safely. If you enjoy problem-solving, continuous improvement, and making manufacturing processes better every day, we'd love to hear from you. What You'll Do As a Systems Manufacturing Engineer, you'll play a key role in supporting...

Design Engineer - Mechanical (Low Voltage) Location: Humble, TX About the Role We're looking for a motivated Mechanical Design Engineer (LV) to join a collaborative team developing custom power distribution solutions used across multiple industries. In this role, you'll take concepts from idea to production-creating, updating, and releasing mechanical drawing packages that meet customer, safety, and industry standards. If you enjoy problem-solving, working hands-on with manufacturing teams, and contributing to continuous improvement, this role offers strong growth potential. Key Responsibilities Develop and update mechanical approval drawings based on project requirements and customer specifications. Create and release manufacturing drawings, including sheet-metal fabrication details (flat patterns and bend profiles) and mechanical BOMs. Ensure drawings are released on time to support production schedules. Support welding, fabrication, and assembly teams...

Overview Position Summary The Project Engineer (Electrical) is responsible for providing technical engineering information to the Project Manager, Craft Supervisors, and Corporate Functional Managers to ensure design development and construction work complies with all engineering standards, codes, specifications, and design instructions applicable to one or more disciplines. This position also provides project controls support (cost, scheduling, estimating) and subcontract oversight to project construction supervision and craft personnel. Location & Travel Details You'll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position that requires travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, and WY, with additional locations added frequently as our...