34 product engineer body jobs found

Product Engineer - Body Closures Overview / Summary We are seeking a Product Engineer with experience in Body Closures, specifically Side Door Assemblies and related opening and closing systems. The engineer will be responsible for component development and release throughout the product lifecycle, including concept design, supplier engagement, BOM management, systems requirements, simulation analysis, prototyping, validation testing, and production support. The role will also involve identifying root causes and developing technical solutions for issues affecting production while supporting cost, weight, quality, performance, and timing objectives. Key Responsibilities Support Side Door Assemblies, including door structures, hinges, check arms, and related components. Support component development and release throughout the product lifecycle. Participate in concept design, supplier engagement, BOM management, systems requirements, simulation analysis, prototype...

Product Engineer - Body Closures / Handles, Locks & Mechanisms Overview / Summary We are seeking a Product Engineer with experience in automotive mechanisms, body closures, or related mechanical systems. This role is responsible for the design, development, validation, release, and implementation of handles, locks, and mechanisms for vehicle closures, including doors, hoods, frunks, tailgates, liftgates, and decklids. The engineer will work with cross-functional teams and suppliers to develop robust, manufacturable products that meet requirements for quality, safety, performance, cost, mass, and timing. The role also supports engineering changes, validation, production launch, and ongoing product improvements. This is a fully onsite position in Dearborn, Michigan, with occasional travel to supplier manufacturing and testing sites and manufacturing plants. Key Responsibilities Lead system design and design development for handles, locks, and mechanisms....

Product Engineer - Body Closures Overview / Summary We are seeking a Product Engineer with experience in automotive body closure systems to support the development and release of technical requirements and engineering strategies. The role will focus on rear closure systems, including liftgates, tailgates, cargo doors, swing gates, hinges, latches, mechanisms, sheet metal structures, and system integration. The ideal candidate will have experience developing closure systems from early development through product launch, along with experience writing technical specifications and engineering documentation. Key Responsibilities Develop and release technical requirements and engineering strategies for rear closure systems. Support all aspects of rear closures, including liftgates, tailgates, cargo doors, swing gates, hinges, latches, mechanisms, and system integration. Develop technical documentation, including DVP&R, DFMEA, technical requirements, and technical...

V2Soft is a global leader in IT services and business solutions, delivering innovative and cost-effective technology solutions worldwide since 1998. We have We have headquartered in Bloomfield Hills, MI and have 16 offices spread across six countries. We partner with Fortune 500 companies to address complex business challenges. Our services span AI, IT staffing, cloud computing, engineering, mobility, testing, and more. Certified with CMMI Level 3 and ISO standards, V2Soft is committed to quality and security. Beyond our work, we actively support local communities and non-profits, reflecting our core values. Join us to be part of a dynamic and impactful global company! Please visit us at www.V2soft.com to know more. Position Description: ***CUSTOMER HAS 4 POSITIONS TO FILL WITH THIS JOB DESCRIPTION / THIS ORDER IS THE PRIMARY ORDER TO RECEIVED CANDIDATES FOR REVIEW*** Body Closures Engineer in charge of Side Door Assemblies along with opening and closing related actions....

V2Soft is a global leader in IT services and business solutions, delivering innovative and cost-effective technology solutions worldwide since 1998. We have We have headquartered in Bloomfield Hills, MI and have 16 offices spread across six countries. We partner with Fortune 500 companies to address complex business challenges. Our services span AI, IT staffing, cloud computing, engineering, mobility, testing, and more. Certified with CMMI Level 3 and ISO standards, V2Soft is committed to quality and security. Beyond our work, we actively support local communities and non-profits, reflecting our core values. Join us to be part of a dynamic and impactful global company! Please visit us at www.V2soft.com to know more. Position Description: Rear Closures Core Engineering & Subject Matter Expert. Looking for an energetic self-starter to develop and release technical requirements and strategy for moving rear closures. Ideal candidate would have experience working with internal...

Overview Manufacturing Engineer is responsible for creating, documenting, developing, and implementing the processes and procedures used to assemble the company's product. Involvement will range from initial project sourcing all the way through SOP +90 days, or as required for corporate employees or launch through EOP plant employees. Both may be required to support implementation of engineering changes for current production products. Piston Automotive wasn't just founded to make things. It was founded to make things better. And that begins with building better teams solely dedicated to achieving excellence at every level of execution through a combination of experience, expertise, and a deep seeded passion for what we do. Our assemblies consistently set the standard because our people consistently raise the bar. Why Piston Automotive? Competitive Wages, Paid Holidays & Vacation, Medical & Rx Plans, Dental & Vision Plans, Flexible Spending Accounts, Health...

Job Description Work Arrangement Role is based at the General Motors Global Technical Center in Warren, MI, with support responsibilities that may span Body, Paint, and General Assembly ME Centers. Extended travel, off-shift work, and holiday support may be required during installation and launch phases. The Role The Installation Engineer leads in-plant project management and technical execution of industrial tooling, equipment, and conveyance system installations for General Assembly. This role is responsible for ensuring safe, compliant, and high-quality installations that meet manufacturing standards, timing, and cost objectives. Execution Engineers act as the primary technical interface for installation suppliers, oversee union trades, develop installation requirements, manage project finances and schedules, and ensure all installation activities align with GM engineering specifications and documented processes. What You'll Do Project & Installation Execution...

Job Description We made history and now we work to transform the future - for our customers, our communities and our families. You'll see your work on the road every day, helping people move freely and pursue their dreams. At Ford, you can build more than vehicles. Come build what matters. Product Development uses design thinking & user experience methods to deliver breakthrough products and services that delight our customers. We bring innovative, exciting, and sustainable ideas to life. We have opportunities around the world for you to contribute to advancements in autonomy, electrification, smart mobility technologies, and more! In this position... This position is within our Product Development organization focused on the design and development of structural high pressure die cast (HPDC) components to support the future body in white (BIW) and frame designs. The engineer in this position will be responsible for generating HPDC structural casting design solutions,...

Job Description At General Motors, our product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed not just to be seen, but to be felt. We're turning today's impossible into tomorrow's standard -from breakthrough hardware and battery systems to intuitive design, intelligent software, and next-generation safety and entertainment features. Every day, our products move millions of people as we aim to make driving safer, smarter, and more connected, shaping the future of transportation on a global scale. The Role: We are seeking a highly skilled and experienced Lead Chassis Structure Analyst to join our Chassis Systems and Driveline Virtual Design Development Validation (VDDV) team. This role is responsible for leading structural analysis activities for chassis structure, suspension, and driveline system, supporting design development and virtual validation through advanced simulation techniques. You will...

Optimized Job Title Design & Release Engineer - Automotive Closures & Mechanisms Overview / Summary We are seeking a Design & Release Engineer to support the design, development, validation, release, and implementation of automotive handles, locks, and mechanisms for vehicle closures, including hoods, frunks, side doors, tailgates, liftgates, and decklids. The engineer will lead system design and development, supplier coordination, technical reviews, engineering releases, validation activities, and production support. The role will also focus on improving quality while optimizing cost and weight throughout product development and production. This is a fully onsite position based in Dearborn, Michigan , with occasional travel to suppliers, test facilities, and manufacturing plants as required. Key Responsibilities Lead HLM system design and design development to deliver requirements, design rules, regulatory, and functional deliverables....

ALLEN PARK , Michigan Contract: VMS Position Description: The Fit to Nominal Engineer (FtN) will be responsible for validating the Fit and Finish deck that comes from (VAST), identify part to part coordination issues and quality issues (exterior/interior) within product design by measuring the margin and flushness and using the perceived quality audits to confirm part to part compliance by assisting to each launch event (DCV, TT, PP, MP1, MP2). The Fit to Nominal engineer will generate the issue list and setup the binning sessions with the thresholders to ensure a proper and timely manner issue resolution. Also, the Fit to Nominal Engineer has the responsibility of pre-graning and AAR approvals using part dimensional data and launch build data. Specific tasks/responsibilities • Measure vehicle level interior and exterior part to part margins and flushness to confirm compliance to build event requirements (VAST). Measurements will be taken on completed vehicles. • Perform the...

Optimized Job Title Automotive Design & Release Engineer - Handles, Locks & Mechanisms Job Posting Overview / Summary We are seeking an Automotive Design & Release Engineer to support the design, development, validation, release, and implementation of vehicle handles, locks, and mechanisms for vehicle closures, including hoods, frunks, side doors, tailgates, liftgates, and decklids. The engineer will support product development and design improvements focused on quality, cost, weight, performance, and timing. This role will also lead suppliers and guide the design of HLM components while managing requirements related to packaging, design feasibility, NVH, water management, craftsmanship, crash safety, and manufacturing assembly. Key Responsibilities Lead HLM system design and design development across engineering organizations. Manage and lead suppliers to meet cost, weight, quality, performance, and timing targets. Understand the Global...

Product Engineer - Roof Mechanisms Overview / Summary The Product Engineer - Roof Mechanisms is responsible for the design, development, validation, release, and implementation of roof mechanism systems, including moonroofs, convertible tops, alternative roof tops, and related systems. This role drives design improvements to increase quality and optimize cost and weight throughout product development and production. The engineer will lead suppliers and guide the design of roof mechanism components while ensuring compliance with requirements, design rules, regulatory requirements, manufacturing assembly requirements, and key product attributes including package, design feasibility, NVH, water management, craftsmanship, and crash safety. This is a fully onsite position, five days per week. Key Responsibilities Design, develop, validate, release, and implement roof mechanism systems into vehicles. Lead suppliers and guide the design and development of roof...

V2Soft is a global leader in IT services and business solutions, delivering innovative and cost-effective technology solutions worldwide since 1998. We have We have headquartered in Bloomfield Hills, MI and have 16 offices spread across six countries. We partner with Fortune 500 companies to address complex business challenges. Our services span AI, IT staffing, cloud computing, engineering, mobility, testing, and more. Certified with CMMI Level 3 and ISO standards, V2Soft is committed to quality and security. Beyond our work, we actively support local communities and non-profits, reflecting our core values. Join us to be part of a dynamic and impactful global company! Please visit us at www.V2soft.com to know more. Position Description: The Roof Mechanisms Systems Design and Release Engineer is responsible for the design, development, validation, release and implementation of moonroofs, convertibles tops, alternative roof tops, and related systems into vehicles. You will also...

Optimized Job Title Fit & Finish / Product Engineer Job Posting Overview / Summary We are seeking a Product Engineer specializing in Fit and Finish to support vehicle product development and launch activities. This role focuses on validating interior and exterior part-to-part fit and finish, analyzing dimensional data, conducting perceived quality and craftsmanship audits, identifying quality and coordination issues, and supporting timely issue resolution throughout vehicle build events. Key Responsibilities Measure vehicle-level interior and exterior part-to-part margins and flushness to confirm compliance with build requirements. Review completed vehicles to evaluate fit and finish. Perform Perceived Quality Reviews using established audit checklists. Lead Critical to Quality (CTQ) and Perceived Quality (PQ) audits during vehicle launch phases. Summarize and document vehicle compliance at each applicable build event. Generate issue lists and...

V2Soft is a global leader in IT services and business solutions, delivering innovative and cost-effective technology solutions worldwide since 1998. We have We have headquartered in Bloomfield Hills, MI and have 16 offices spread across six countries. We partner with Fortune 500 companies to address complex business challenges. Our services span AI, IT staffing, cloud computing, engineering, mobility, testing, and more. Certified with CMMI Level 3 and ISO standards, V2Soft is committed to quality and security. Beyond our work, we actively support local communities and non-profits, reflecting our core values. Join us to be part of a dynamic and impactful global company! Please visit us at www.V2soft.com to know more. Position Description: The Fit to Nominal Engineer (FtN) will be responsible for validating the Fit and Finish deck that comes from (VAST), identify part to part coordination issues and quality issues (exterior/interior) within product design by measuring the margin...

We work alongside the best and brightest to do incredibly cool things you wouldn't believe. At Roush, you're part of building the future. Are you someone that has a passion for providing innovated solutions to complex challenges? Do you want to work someplace where creativity and new ideas are encouraged? If so, then keep reading. We fuse technology and engineering to provide product development solutions to customers in a diverse range of industries. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. With over 2,400 employees in facilities throughout the United States, Europe, Asia, and South America, our unique combination of creativity and tenacity activates big ideas on a global stage. Job Summary: The Project Engineer Senior within Roush Products Group (RPG) is a broad role that requires working on a variety of...

About Blue Bird Corporation Blue Bird (NASDAQ: BLBD) is recognized as a technology leader and innovator of school buses since its founding in 1927. Our dedicated team members design, engineer and manufacture school buses with a singular focus on safety, reliability, and durability. School buses carry the most precious cargo in the world - 25 million children twice a day - making them the most trusted mode of student transportation. The company is the proven leader in low- and zero-emission school buses with more than 25,000 propane, natural gas, and electric powered buses sold. Blue Bird is transforming the student transportation industry through cleaner energy solutions. For more information on Blue Bird's complete product and service portfolio, visit www.blue-bird.com. JOB SUMMARY The Lead Electrical Architecture Engineer is responsible for defining and implementing the electrical architecture for next-generation commercial vehicle platforms from concept through production...

About Blue Bird Corporation Blue Bird (NASDAQ: BLBD) is recognized as a technology leader and innovator of school buses since its founding in 1927. Our dedicated team members design, engineer and manufacture school buses with a singular focus on safety, reliability, and durability. School buses carry the most precious cargo in the world - 25 million children twice a day - making them the most trusted mode of student transportation. The company is the proven leader in low- and zero-emission school buses with more than 25,000 propane, natural gas, and electric powered buses sold. Blue Bird is transforming the student transportation industry through cleaner energy solutions. For more information on Blue Bird's complete product and service portfolio, visit www.blue-bird.com. JOB SUMMARY The Senior Integration & Vehicle Architecture Engineer is the critical technical owner of vehicle-level integration and architecture definition across Blue Bird platforms. This role is...

About Blue Bird Corporation Blue Bird (NASDAQ: BLBD) is recognized as a technology leader and innovator of school buses since its founding in 1927. Our dedicated team members design, engineer and manufacture school buses with a singular focus on safety, reliability, and durability. School buses carry the most precious cargo in the world - 25 million children twice a day - making them the most trusted mode of student transportation. The company is the proven leader in low- and zero-emission school buses with more than 25,000 propane, natural gas, and electric powered buses sold. Blue Bird is transforming the student transportation industry through cleaner energy solutions. For more information on Blue Bird's complete product and service portfolio, visit www.blue-bird.com. JOB SUMMARY The Sr. Chassis & Vehicle Integration Engineer is responsible for physical vehicle integration, packaging execution, prototype support, and manufacturing implementation across complex vehicle...