20 electronics design engineer jobs found

Job Family: Scientific Research & Analysis (Digital) Travel Required: None Clearance Required: Ability to Obtain Public Trust What You Will Do: We are currently searching for a Catheter Engineer. The person in this role will be performing scientific and technical services in support of cardiovascular intervention research by the Division of Intramural Research, in the National Heart Lung and Blood Institute. The individual will be working on iterative design and testing of catheter devices and imaging algorithms. This is a full-time opportunity supporting the NHLBI office located in Bethesda, MD. Support engineering research and development efforts focused on next-generation catheter systems, guidewires, and accessory electronics. Design catheter components including shafts, distal tips, steering and deflection mechanisms, and sensor integration using advanced materials such as polymers, alloys, braid/wire reinforcements, adhesives, and coatings. Integrate complex...

Overview Position Title: Electro-Mechanical Survivability Engineer (Systems Design & Hardening) Location: Aberdeen, MD Reports To: APM Hardware Job Type: Full-time Clearance Requirement: TS/SCI (able to process, US citizenship is a must) Summary: We are seeking a Senior Electro-Mechanical Survivability Engineer to serve as the lead architect for the electrical and mechanical integrity and environmental hardening of integrated hardware, computing, and communication suites. This role requires a master-level balance of clean-sheet electro-mechanical design and the structural hardening of Commercial Off-The-Shelf (COTS) and Non-Developmental Item (NDI) components that implement commercial grade mounting and electrical connectors. You will be responsible for the "chassis-up" structural architecture of next-generation expeditionary systems, ensuring that high-density processors, sensitive RF components, and high-speed networking hardware and electrical...

Mechanical Engineer II Hardware | Columbia, MD | Full Time Position: Mechanical Engineer II Location: Columbia, MD Category: Hardware Schedule: Standard Day Shift, Monday-Friday Clearance Requirement: Active Secret security clearance (required) Experience Requirement: 5-10 years Compensation Range: $100,000 - $140,000 (based on experience) Position Overview We are seeking an experienced Mechanical Engineer II to support the design, analysis, and development of mechanical systems for electronic products in a mission-focused environment. This role is ideal for a mid-level engineer with a strong background in thermal engineering, mechanical design, and electronics packaging , who can work independently while collaborating closely with cross-functional engineering teams. The Mechanical Engineer II will play a key role in supporting Integrated Product Teams across the full product lifecycle, including design, analysis, prototyping, testing, and sustainment of...

If you're looking for a special place to build or grow your career, you've found it. Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. The Manufacturing Engineer will play a key role in the manufacturing of highly engineered rotational equipment. This individual will be responsible for designing, implementing, and optimizing manufacturing processes, workflows and physical work cells to enhance efficiencies while also working to reduce waste, improve product quality and enhance workplace safety. The qualified candidate will collaborate closely with cross-functional teams - including production,...

Company Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today's world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers' operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a...

Job Title Microelectromechanical Systems Engineer Location ARL Maryland - Adelphi, MD 20783 US (Primary) Job Description Fibertek is currently seeking a Microelectromechanical Systems Engineer to support our team at the Army Research Laboratory (ARL) in Adelphi, MD. The Microelectromechanical Systems Engineer will provide specialized engineering support in the research, design, and fabrication of Micro-Electro-Mechanical Systems (MEMS) devices and novel micro-scale packaging technologies. The MEMS Engineer will work in a cleanroom environment at ARL to advance the design, development, and testing of MEMS-based devices for defense applications. The MEMS Engineer supports ARL's Electromagnetic Effects Branch under the VIRTUE program. The role focuses on R&D in MEMS fabrication, additive manufacturing, micro-scale electronics packaging, and micro-scale energetics. Responsibilities include modeling, fabricating, assembling, and testing micro-scale devices using advanced...

Job Family: Systems Engineering (Digital) Travel Required: None Clearance Required: Ability to Obtain NACI What You Will Do: We are currently searching for a Catheter Engineer. The role will be performing scientific and technical services in support of research by the Division of Intramural Research, in the National Heart Lung and Blood Institute in cardiovascular intervention. The individual will be working on iterative design and testing of catheter devices and imaging algorithms. This is a full-time opportunity supporting the NHLBI office located in Bethesda, MD. Support engineering research and development efforts focused on next-generation catheter systems, guidewires, and accessory electronics. Design catheter components including shafts, distal tips, steering and deflection mechanisms, and sensor integration using advanced materials such as polymers, alloys, braid/wire reinforcements, adhesives, and coatings. Integrate complex electronic...

Position: Mechanical Engineer Location: US - MD, Columbia Category: Hardware Clearance Requirement: Active SECRET We are seeking a motivated Mechanical Engineer to support the design and development of mechanical systems for electronic products. This role is ideal for a early-career engineer with a strong interest in electronics packaging, thermal management, and 3D CAD modeling. You will support Integrated Product Teams in the design, analysis, manufacture and test of digital and RF/analog and mixed electronics hardware at all levels of integration (chip, component, printed circuit board, module/chassis, system) across a multitude of platforms/domains (space, land, sea, air, cyber). You will work closely with senior engineers to help design enclosures, assemblies, and components, with an emphasis on SolidWorks design, mechanical integration with PCBs, and thermal considerations. This is a hands-on, learning-focused role with opportunities to grow technical and product...

Job Family: Systems Engineering (Digital) Travel Required: None Clearance Required: Ability to Obtain Public Trust What You Will Do : We are currently searching for a Cardiovascular Catheter Engineer. The role will be performing scientific and technical services in support of research by the Division of Intramural Research, in the National Heart Lung and Blood Institute in cardiovascular intervention. The individual will be working on iterative design and testing of catheter devices and imaging algorithms. This is a full-time opportunity supporting the NHLBI office located in Bethesda, MD. Support engineering research and development efforts focused on next-generation catheter systems, guidewires, and accessory electronics. Design catheter components including shafts, distal tips, steering and deflection mechanisms, and sensor integration using advanced materials such as polymers, alloys, braid/wire reinforcements, adhesives, and coatings. Integrate complex...

Hamilton Associates, a diverse, growth-oriented, Lean-driven, ISO-Certified manufacturing company is currently seeking an experienced Test Engineer II to join our team. For additional information about our Company and each of our divisions and our product lines, please visit our websites at www.hamiltonassoc.com, www.elscoguides.com, www.atitest.com, and www.dirtkiller.com. Elevator Safety Company (ELSCO), a division of Hamilton Associates, Inc., is the leading designer and manufacturer of roller guides and swivel sliding guide shoes used by elevator manufacturers and building contractors worldwide. As a result of our 60+ years of success and continuing growth within our industry, ELSCO is recognized as a leader in providing superior, consistent and responsive customer service. To further solidify and strengthen this part of ELSCO's brand promise, the Company is building an organizational culture of teamwork, engagement, learning, and continuous improvement/ innovation. As our...

Sigma Defense is currently seeking a Mechanical Engineer to work in support of the Army for the Network Modernization & Mission Network Technical Service Support program (NetMod). NetMod sets forth the work efforts required to provide product technical support services for systems and equipment being produced, fielded, modified, or supported by PdM Network Modernization (NetMod) and PdM Mission Network of the Project Manager (PM) Tactical Network (TN) of the Program Executive Office for Command Control and Communications-Tactical (PEO C3T). This support may also include future systems and equipment that is acquired for the Army to maintain its technological advantage. Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be...

Full Time Sparks, MD, US iRF - Intelligent RF Solutions is a leader in providing tailored solutions for SIGINT and Electronic Warfare (EW) missions. We understand our customers' challenges and use our expertise to create solutions. We are not just a supplier, but a problem-solving partner with a strong foundation in supporting global defense and intelligence missions. We are dedicated to attracting high-achieving individuals. Our team members are bound by a common purpose - commitment to our customers' missions. Our culture is anchored in our steadfast values, our collaborative spirit, and a relentless pursuit of excellence. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: Provide...

The Junior Design Engineer Intern will support the design, documentation, and field execution of Building Automation Systems (BAS). This role provides hands-on exposure to both engineering design and on-site activities while working closely with the engineering and operations teams. Key Responsibilities: Assist with mechanical and electrical circuit design and participate in design reviews Support control system design and drawing development using AutoCAD Assist in the preparation of proposals and review of construction plans and specifications Support field inspections and testing to verify system performance and compliance with project requirements Assist with the preparation of technical memoranda, reports, and electronic deliverables Participate in field activities including site investigations and on-site observations Collect, organize, and document technical data accurately Requirements Strong written and verbal communication skills Experience with Bluebeam...

Responsibilities This position serves as a Senior Electrical Engineer for the Battle Management System (BMS) family of projects. The Electrical Engineer will apply robust electrical engineering processes working closely with the Electrical team already established in H42. Seeking experienced person with hands on fabrication skills (soldering, cable making, use oscilloscope, volt meter, small hand tools, crimper, PCB assembly). This candidate will have skills in electronic circuits, semiconductors, logic design, schematic capture and PCB layout, cable/harness design, and microprocessors. The Senior Electrical Engineer will be expected to communicate and collaborate on a regular basis with H42 EE team to clarify program intent, identify problems, suggest changes, and develop and document solutions. Some of additional duties may include participating in the installation, integration, and testing of the developed changes at Dahlgren. As a Senior Electrical Engineer responsibilities...

Do you have a high degree of creativity? Do you enjoy solving problems with an innovative and detail-oriented approach? Have you excelled in high pace work environments? Annapolis Micro Systems, Inc. is seeking a self-motivated and creative individual to expand our world-class team. We are looking for an engineer willing to learn and grow with our company. Our high-performance computing products enable technology that leads the industry. We want you to help design and push our current and future products to an even higher level by creating accurate and high-performance designs of PCB Heatsinks, Face Plates, Brackets, Enclosures, and much more! Work with our PCB Designers to create efficient Convection and Conduction Cooled heatsinks. Perform thermal simulations to ensure proper cooling in our Chassis. Enjoy the benefits of working for a small privately held company with on-site mechanical hardware and software design, as well as on-site manufacturing and testing. The close...

Company Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today's world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers' operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a...

Intern, Manufacturing Engineer LOCATION: Westminster / Maryland (US-MD), United States " BRAND: Knorr Brake Company " REQUISITION ID: 9098 " JOB GRADE: 0 " ON-SITE/REMOTE: On-site Knorr Brake Company is the innovative leader in the manufacture and supply of braking systems, passenger doors and climate-control equipment for all types of Mass Transit customers such as: METRO, Light Rail Vehicles, High-Speed Trains, Commuter Rail and Monorail Vehicles for the North America market. We're part of the Knorr-Bremse Group, the global leader in braking technologies. As part of our team, you'll collaborate with a world of talented and dedicated colleagues whose sense of purpose complements your own. You'll find rewarding opportunities, diverse experiences, partnerships, and an unwavering commitment to ethics and integrity. Innovation is part of our DNA. Achievement drives our culture. Learn more today at www.KnorrBrake.com! JOB DESCRIPTION: Responsibilities will...

Job Description (General Summary) Intralox, the leading conveyance solutions provider, is currently seeking a qualified and talented individual for an Automations Controls Engineering position to work on complex and game-changing problems. Position Description: Perform a wide variety of duties in an R&D environment. Design and develop software for equipment in the conveyance industry with detailed emphasis on programming using PLC languages, and other higher-level programming languages. Software installation and troubleshooting during commissioning phase. A wide degree of creativity and latitude is expected in the day-to-day work. Each role varies in the amount of travel required. This position is based out of our office in Hanover, MD in the Greater Baltimore/Washington DC area. Intralox is a division of Laitram, L.L.C., with an extensive portfolio of innovative conveyance solutions and services that improve lives and optimize businesses worldwide. Our global workforce...

Clearance Required: Ability to Obtain a Secret Education Required: BA/BS US Citizenship: Required Summary The MIL Corporation is looking for an Electromechanical Engineering Manager (Engineering, Senior Manager) to lead and mentor our mechanical and electrical engineering group for development of communications systems. This role supports a wide range of projects that require solutions to design constraints. The person filling this role will provide experience and leadership for the overall analysis and design of complex systems supporting the DoD and other government agencies. This role is based out of our Lexington Park, MD location. This position currently requires a hybrid schedule with 4 days on-site. Schedule is subject to change based on company/contract requirements. Responsibilities Serve as group manager for electro-mechanical engineering group, providing technical and business practice mentoring to direct reports and others within our...

Varstaff is currently searching for a Manufacturing Engineer III professional! This is an immediate need. Hourly Rate: $51.54/hr Overview: You will research, design, develop, test, certify, deploy, and improve cutting-edge products and services that range from advanced mission payloads and electronic systems to highly integrated aircraft. Specifically, you will be instrumental in the development and enhancement of our special mission aircraft, ensuring they meet the unique needs and stringent requirements of our clients. Your responsibilities will include consulting with program management, design engineers, quality assurance, and production teams to develop the most efficient and cost-effective means of producing our products at the highest quality possible. You will review engineering designs for producibility and oversee all aspects of design conception through implementation. This includes the development of tooling and fixtures, work instructions, and production...