27 engineering development intern jobs found

The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Design electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Document all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state...

Who We Are Williams International is a privately-owned company that develops and manufactures jet engines for both military and commercial aircraft applications. We are a company of creators who deliver pioneering ideas and technologies that lead the aerospace industry. Our culture fosters creativity, collaboration, and continuous learning to position our team members to inspire each other and provide quality products and supporting services that exceed the expectations of our customers. The Opportunity Williams International has an exciting opportunity for an Engineer to join our team. The qualified candidate will have primary responsibility for working in a lean manufacturing cell implementing new gas turbine engines component part designs and developing process improvements for existing designs. This position also will include creating estimated process plans, part detail designs (blue prints), manufacturing process plans, performing process development, NC programming,...

Who We Are Williams International is a privately-owned company that develops and manufactures jet engines for both military and commercial aircraft applications. We are a company of creators who deliver pioneering ideas and technologies that lead the aerospace industry. Our culture fosters creativity, collaboration, and continuous learning to position our team members to inspire each other and provide quality products and supporting services that exceed the expectations of our customers. The Opportunity Williams International has an exciting opportunity for an Engineer to join our team. The qualified candidate will have primary responsibility for working in a lean manufacturing cell implementing new gas turbine engines component part designs and developing process improvements for existing designs. This position also will include creating estimated process plans, part detail designs (blue prints), manufacturing process plans, performing process development, NC programming,...

Who We Are Williams International is a privately-owned company that develops and manufactures jet engines for both military and commercial aircraft applications. We are a company of creators who deliver pioneering ideas and technologies that lead the aerospace industry. Our culture fosters creativity, collaboration, and continuous learning to position our team members to inspire each other and provide quality products and supporting services that exceed the expectations of our customers. The Opportunity Williams International has an exciting opportunity for an Engineer to join our team. The qualified candidate will have primary responsibility for working in a lean manufacturing cell implementing new gas turbine engines component part designs and developing process improvements for existing designs. This position also will include creating estimated process plans, part detail designs (blue prints), manufacturing process plans, performing process development, NC programming,...

Who We Are Williams International is a privately-owned company that develops and manufactures jet engines for both military and commercial aircraft applications. We are a company of creators who deliver pioneering ideas and technologies that lead the aerospace industry. Our culture fosters creativity, collaboration, and continuous learning to position our team members to inspire each other and provide quality products and supporting services that exceed the expectations of our customers. The Opportunity Williams International has an exciting opportunity for an Engineer to join our team. The qualified candidate will have primary responsibility for working in a lean manufacturing cell implementing new gas turbine engines component part designs and developing process improvements for existing designs. This position also will include creating estimated process plans, part detail designs (blue prints), manufacturing process plans, performing process development, NC programming,...

Foods you love. Brands you trust. And a career that empowers you to grow. At Nestlé USA, we're all working towards the same goal - to delight and deliver for our consumers. With a rich portfolio of beloved brands, including DiGiorno, Toll House, and Coffee mate, in 97% of U.S. households, we have a unique opportunity - and responsibility - to be there for every moment in our consumers' lives. Joining Nestlé means becoming part of an inclusive workplace that inspires innovation, encourages strategic thinking and creativity, and celebrates your achievements. No matter where you work within the organization, you are empowered to challenge the status quo, embrace risk-taking, and pioneer new ideas. Our supportive and collaborative environment encourages bold ambitions and continuous learning so that everyone can grow and thrive. This position is not eligible for Visa Sponsorship. As a Factory Project Engineer, you will provide technical leadership by identifying, developing, and...

Location: Salt Lake City, UT (onsite) Reports to: R&D Engineering Manager About SINTX Technologies SINTX Technologies (NASDAQ: SINT) develops and commercializes advanced ceramic materials, most notably silicon nitride (Si3N4) for medical, aerospace/defense, and industrial applications. Our innovations in silicon nitride-based biomaterials and coatings have been clinically used since 2008 and continue to expand into new platforms and markets. Foci / Mission Focus 1 Developing and commercializing technologies - converting promising technologies into revenue-generating commercial products Focus 2 Supporting manufacturing mission to deliver components within spec and on time - problem solving support role Technology Areas: Silicon nitride bio ceramics and associated materials with emphasis in implantable device applications Additive of ceramic-polymer composites and ceramics Requirements Skills/Duties: Implantable medical device development: Process...

Job Description What We're Looking For: Michael Baker International is seeking a Senior Utility Design (Technical Manager II) to join our growing Salt Lake City (Midvale), UT office. The ideal candidate will be able to perform conventional and complex utility designs, utility coordination, and project specific communication. What You'll Do: Lead with gathering background information related to a project site which includes reviewing as-built plans and mapping existing utility service Lead with the preparation of drawings such as those needed for highways, structures, and water/wastewater projects Lead with quantities and project cost estimates Coordinating with design technicians to ensure timely and accurate deliverables Lead with document preparation for regulatory agencies to obtain required permits Lead with preparation for client and project meetings Lead internal project meetings and participates as necessary Occasionally visits project sites,...

About the Job The Assistant CAD Manager - Plant 3D & Engineering Systems is a senior-level technical and leadership role with responsibility for supporting the CAD Manager in the administration, standardization, and continuous improvement of the company's CAD and engineering systems, with a strong focus on AutoCAD Plant 3D. This position requires demonstrated leadership experience and ability to combine advanced technical expertise with team leadership, mentoring, and enterprise-level system support. The role serves as a technical delegate to the CAD Manager, providing oversight of Plant 3D and Plant PID specification development and integration into design projects. The role also provides advanced user support across multiple offices. Essential Duties and Responsibilities CAD Management & Leadership Support the CAD Manager in executing CAD strategy, standards, and governance. Mentoring, technical guidance, and coordination of CAD users across offices. Act as...

Join Our Team as a Professional Engineer (Structural Focus) at Water Works Engineers! Meet Water Works Engineers: Water Works Engineers (WWE) is a leading civil and environmental engineering firm specializing in innovative and sustainable solutions for water infrastructure projects across the United States. For over 20 years, we have excelled in planning, designing, and implementing projects involving the treatment, storage, and conveyance of drinking water, recycled water, and wastewater. With offices in Scottsdale, AZ; Redding, Roseville, San Mateo, San Diego, and Los Angeles, CA; Star, ID; Albuquerque, NM; and Salt Lake City, UT, we bring an understanding and sensitivity to Western water and wastewater issues. Our expertise includes water and wastewater treatment, stormwater management, hydraulic modeling, and environmental compliance. Committed to innovation, integrity, and teamwork, we enhance the sustainability and resilience of the communities we serve. Why this...

Albany Engineered Composites (AEC) is one of the most technically advanced designers and manufacturers of lightweight composite aerospace structures, subassemblies and components. For more than 50 years, AEC has innovated advanced composite solutions for defense and commercial industries in applications from large commercial transports to fighter jets and commercial and military rotorcraft. Our composite design and fabrication expertise can be found on many commercial platforms such as Boeing's 7-series family, the Airbus A380 aircraft as well as Sikorsky S-76 helicopter. For defense programs, AEC provides a wide range of products including complete structural assemblies, flight critical components, primary and secondary structural elements for platforms such as the F-35 Lightning II, the CH-53K Heavy-lift Helicopter and the Joint Air-to-Surface Standoff Missile (JASSM). AEC is committed to delivering high-quality, economical composite solutions to our customers. Significant...

Civil Engineer Designer | Utility Design Job Location: Salt Lake City area - (South Jordan, UT) Own Your Future! Psomas is 100% employee-owned, creating a culture of shared accountability, stewardship, and long-term thinking. With no outside shareholders, decisions are guided by what's best for our people, our clients, and the communities we serve. As a Civil Engineer Designer, you won't just design projects-you'll be an owner contributing to the firm's sustained success and legacy. As a Civil Engineer Designer- Utility Designer , you won't just contribute to projects - you'll be an owner helping shape the firm's continued success and legacy. The Psomas Advantage: Employee Ownership : 100% company-paid ESOP plus a 401(k) with immediate company match. People First Culture : We value diverse perspectives, collaborative leadership, and a shared commitment to technical excellence and people development. 4 ½ Day Work Week Schedule: In Psomas office Monday thru...

Project Manager Civil Engineer | Water Infrastructure Location: Salt Lake City (South Jordan, UT) Own Your Future! Psomas is 100% employee-owned, creating a culture of shared accountability, stewardship, and long-term thinking. With no outside shareholders, decisions are guided by what's best for our people, our clients, and the communities we serve. As a Project Manager, you won't just lead projects-you'll be an owner contributing to the firm's sustained success and legacy. As a strategic Project Manager, you won't just contribute to projects - you'll be an owner helping shape the firm's continued success and legacy. The Psomas Advantage: Employee Ownership : 100% company-paid ESOP plus a 401(k) with immediate company match. People First Culture : We value diverse perspectives, collaborative leadership, and a shared commitment to technical excellence and people development. 4 ½ Day Work Week Schedule : In Psomas office Monday thru Thursday (9-hour days) and...

ABOUT THIS ROLE LVT is seeking a Senior Mechanical Engineer to join the team at our American Fork HQ and Spanish Fork MFG facilities. Here you will work on core development for AI/ML enabled security solutions including but not limited to optical pan/tilt cameras, batteries, solar power, electronics packaging, mechanisms, sensors and payloads. The role requires high ownership and frequent collaboration with other core disciplines. The ideal candidate would be practical, hands-on and a self starter. High growth potential is possible as well as additional leadership opportunities present themselves. RESPONSIBILITIES Execute rapid evaluation of engineering concepts in a wide range of fieldsIdentify partners in industry to engage with, and manage early vendor relationships Perform trade studies and physics-based analysis of various engineering problems Manage internal and external market research and comparisons Design, implementation, and test of complex...

Job Description INTEGRATED DESIGN and ADVISORY The Integrated Design and Advisory business vertical is one of the business verticals at Michael Baker International with more than 850 professionals located across the country. Established as a national professional and consulting services delivery platform, we unite architecture and engineering design expertise with strategic advisory services to deliver holistic and innovative solutions that address the business and project objectives of our clients. We serve clients across various sectors, including industrial, defense contractors, data centers, aerospace, life sciences, healthcare, higher education, aviation, rail and transit, and the federal government. Integrated Design leverages the early involvement of all project stakeholders and key disciplines such as mechanical, electrical, plumbing, structural and fire protection (MEP+S+FP) engineering, as well as architecture and planning. Our Advisory capabilities include...

At Maverik, we don't just offer jobs, we offer adventures. As a Senior Manager, Civil Engineering, you'll provide leadership and technical oversight for civil engineering and site planning across multiple high-profile land development projects. This role blends hands-on engineering expertise with people leadership, ensuring projects are delivered on time, on budget, and to Maverik's development standards while supporting long-term company growth. Why this role matters: This role is critical to bringing Maverik's growth strategy to life. As the senior engineering manager for site planning and civil development, you'll ensure high-profile land development projects move from concept to reality with precision, quality, and consistency. By guiding internal teams, partnering with external consultants, and upholding development standards, this role ensures projects are delivered on time, on budget, and built to last-while also providing expert engineering support that protects and...

About Lilac Solutions, Inc. Lilac exists to solve one problem: lithium supply. By engineering scalable lithium extraction technology, we help industries produce lithium faster, cheaper, and cleaner. Our ion exchange technology is rooted in scientific precision and commercial know-how, making lithium supply a non-issue for global electrification. Our materials, engineering, and approach uniquely position us to design and develop commercial projects across various lithium sources. We help lithium producers rapidly and responsibly scale production from brine resources with versatile, cost-effective, and dynamic technology solutions. Lilac is supported by the largest players from the mining and processing industry, as well as significant investment funds. Lilac investors include BMW, SK, Mitsubishi, Sumitomo, Bill Gates' Breakthrough Energy Ventures, Mercuria, Lower Carbon Capital, and MIT's The Engine. About the role Lilac is seeking a Control and Instrumentation Engineer...

Join Our Team as a Civil / Environmental Engineer at Water Works Engineers! Meet Water Works Engineers: Water Works Engineers (WWE) is a leading civil and environmental engineering firm specializing in innovative and sustainable solutions for water infrastructure projects across the United States. Since 2005, we have excelled in planning, designing, and implementing projects involving the treatment, storage, and conveyance of drinking water, recycled water, and wastewater. With offices in Scottsdale, AZ; Redding, Roseville, San Mateo, San Diego, and Los Angeles, CA; Star, ID; Albuquerque, NM; and Salt Lake City, UT, we bring an understanding and sensitivity to Western water and wastewater issues. Our expertise includes water and wastewater treatment, stormwater management, hydraulic modeling, and environmental compliance. Committed to innovation, integrity, and teamwork, we enhance the sustainability and resilience of the communities we serve. Why this role matters: As...

The role - what you'll do Barr is seeking an electrical engineer to join our Salt Lake City office. In this hybrid role, you will support the Engineering and Design business unit, working with multidisciplinary project teams and providing electrical engineering and related technical expertise. Work will include integrating process, mechanical, and control requirements into comprehensive electrical systems. Project work will include the design of power and controls for power plants, refineries, mine processing facilities, and other heavy industrial facilities, as well as water and wastewater treatment facilities for municipal clients. A successful person in this role will have strong interpersonal, oral, and written communication skills. They must possess a flexible working style and be willing to occasionally modify their schedule to meet deadlines and client needs. They must be able to work cooperatively in a project team environment that encourages self-initiative and...

Job Description The Principal Engineer, Tooling is responsible for new tooling for new products and supporting product improvements through adherence to good engineering and documentation practices. The key responsibility of this position is to lead, maintain timeline and budget, support and manage tooling & molding projects and be action-oriented while adhering to defined procedures. The incumbent will also liaise with the Molding Engineer, Production, Quality, and Maintenance. Monitor and coach junior level engineer. It is expected that the Principal Engineer completes complex engineering projects with peer input and guidance from engineering management. They will work on advanced, complex technical projects or business issues requiring state of the art technical or industry knowledge. Work will be accomplished autonomously where goals are generally communicated in solution or project goal terms. The Principal Engineer will consistently make decisions regarding the overall...