4804 general engineer jobs found

Are you looking for a Challenge? Looking for an innovative organization and the opportunity to learn and grow professionally? We can help! We are seeking a General Engineer under the Temporary Professional Staffing Services contract with the Department of Veterans Affairs. This project will provide professional staffing services to the Medical and Engineering Department's capabilities at the Long Beach Veterans Affairs Healthcare System (LBVAHCS). Positions will be assigned to specific sections within the department, including Capital Development, Projects & Construction, Business Management, and Maintenance & Operations, and report to the respective Section Supervisor in support of medical center tasks. The position is on-site, 40 hours per week, 8 hours per day, based at the LBVAHCS, located at 5901 E. 7th Street, Long Beach, CA 90822. I've never heard of Terrestris. What do you do? At Terrestris, we leverage technology to create better mission outcomes through...

Summary The Electrical Engineer performs duties involving analysis, troubleshooting, design, specification writing, drawing preparation, and cost estimating on projects/systems in the electrical, electronics and controls fields. These duties are primarily associated with the operation, maintenance and improvement of the St. Lawrence Seaway locks and related facilities owned by the U.S. DOT. Familiarity with related engineering fields, such as mechanical and civil, is also required. Duties Help As a General Engineer (Electrical), you will : Responsible for upgrading and maintaining facilities' power distribution systems, Programmable Logic Controllers (PLC's), Human Machine Interface (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems. Knowledge of PLC and HMI programming required and ability to set up graphic pages for interface by end users. Perform engineering design work for projects in the electrical and controls fields to include preliminary site...

Posterity Group LLC is a veteran owned, service-disabled small business, headquartered in Rockville, MD, that specializes in federal government contracting and staffing. We are tasked with staffing The Long Beach VA Healthcare System (LBVAHCS) in Long Beach, CA with a General Engineer. The General Engineer expected to perform the following: Development and Planning: Determines requirements, reconnaissance, location, and prepares designs, specifications and estimates. Applies a broad knowledge of methods, precedents, and standards to significantly diverse and intense work complexities. Work complexities require not only adaptation or modification of precedents but a versatile and innovative approach to solve problems where serious conflicts exist between management requirements and engineering principles. Performs or directs surveys and investigations to establish baseline data necessary to initiate design. Evaluates baseline data and incorporate salient factors into...

This position will support our joint venture with partner company, Dayton Group, Inc. DGI-ATI (JV) has a current need for a full-time General Engineer. The General Engineer will have contracting experience with energy and water conservation and performance. The General Engineer will prepare interagency energy reports, analyze utility data, and identify opportunities for reducing utility costs. Great Pay and Benefits for a General Engineer: Competitive salary of $97,000 - $110,000/year depending on experience 11 annual paid holidays and minimum 13 days of paid leave; Employee and family medical, dental, vision, and prescription insurance with 75% of the premiums paid by the company; Employer paid short-term and long-term disability, and life insurance. 401(k) plan immediately vesting with 4% employer match; and Professional development assistance including memberships, professional licenses, and tuition reimbursements. Duties and Responsibilities Duties may include, but...

Since 1947, Crowder has built a legacy of success in the construction industry. We work throughout the Southeast on heavy construction infrastructure projects ranging from bridges, dams, water and waste water treatment facilities, power plants and other energy facilities. We are a general contractor who self performs civil, electrical and mechanical trades on both traditional and more complex alternative delivery projects. As a family-owned company, it is the spirit of not only doing the right things, but doing things the right way that is the true legacy of our founders and our people. Crowder is Building America and Proud of It® as reflected in our Mission Statement: We are dedicated to superior performance and committed to making a positive difference for our clients, for our communities, and in the lives of our employees. If you are looking for a career, not just a job, with a company committed to your future, apply today. CROWDER IS PROUD TO BE AN EQUAL OPPORTUNITY...

Job Title General Civil Engineer Interest (CAD, Engineer, PM, Team Leader) Job Type Full-time Category Engineering Education Bachelor's Degree Location Bay City - Bay City, MI 48706 US Charlottesville - Charlottesville, VA 22901 US Fairfax - Fairfax, VA 22030 US (Primary) Frederick - Frederick, MD 21701 US Upper Marlboro - Upper Marlboro, MD 20772 US Job Description ADTEK Engineers, Inc. is a multi-disciplinary engineering firm providing comprehensive civil engineering, structural base building design, and specialty engineering services. Our mission is to deliver high-quality, personalized engineering solutions through collaboration, creativity, and strong client relationships. At ADTEK, our people are our promise and the foundation of our continued success. We employ talented and motivated professionals at all levels-from CAD Technicians to Senior Project Managers. While we may not have a specific opening in those roles at this time, we invite you to submit your resume...

Job Title General Structural Engineer Interest (CAD, Engineer, PM, Team Leader in Base-Building or Cold-Formed Steel Design) Job Type Full-time Category Engineering Education Bachelor's Degree Location Bay City - Bay City, MI 48706 US Charlottesville - Charlottesville, VA 22901 US Fairfax - Fairfax, VA 22030 US (Primary) Frederick - Frederick, MD 21701 US Upper Marlboro - Upper Marlboro, MD 20772 US Job Description ADTEK Engineers, Inc. is a multi-disciplinary engineering firm providing comprehensive civil engineering, structural base building design, and specialty engineering services. Our mission is to deliver high-quality, personalized engineering solutions through collaboration, creativity, and strong client relationships. At ADTEK, our people are our promise and the foundation of our continued success. We employ talented and motivated professionals at all levels-from CAD Technicians to Senior Project Managers. While we may not have a specific opening in those roles...

Job Description: Job Summary The Industrial Engineer supports General Assembly operations by driving efficiency, standardization, and continuous improvement on the factory floor. This role blends hands-on operational involvement with strong analytical skills to optimize takt time, manpower planning, and overall production performance. The engineer works closely with supervisors, team leads, and cross-functional partners to establish standard work, prepare for digital manufacturing systems, and deliver measurable operational improvements. Key Responsibilities Develop and maintain takt-time targets and station-level manpower plans to balance production lines Conduct time studies and motion analyses to validate standard work and eliminate inefficiencies Build and manage production performance dashboards tracking throughput, bottlenecks, and work-in-process Lead continuous improvement initiatives including Kaizen events, 5S audits, and visual management Collaborate...

Since 1947, Crowder has built a legacy of success in the construction industry. We work throughout the Southeast on heavy construction infrastructure projects ranging from bridges, dams, water and waste water treatment facilities, power plants and other energy facilities. We are a general contractor who self performs civil, electrical and mechanical trades on both traditional and more complex alternative delivery projects. As a family-owned company, it is the spirit of not only doing the right things, but doing things the right way that is the true legacy of our founders and our people. Crowder is Building America and Proud of It® as reflected in our Mission Statement: We are dedicated to superior performance and committed to making a positive difference for our clients, for our communities, and in the lives of our employees. If you are looking for a career, not just a job, with a company committed to your future, apply today. CROWDER IS PROUD TO BE AN EQUAL OPPORTUNITY...

Open Date 2/2/2026 Exempt/Non-Exempt Exempt Full-Time/Part-Time Full-Time Location ColeBreit Engineering (Bend, OR) Pay Range $110,000-$145,000 Annually (Commensurate with Experience) About the Organization ColeBreit Engineering is a client-focused mechanical, electrical, plumbing, and fire protection engineering and design consulting firm with extensive experience serving a wide range of industry sectors. Our expertise spans higher education and K-12 schools, multi-family and high-end residential, healthcare, commercial, hospitality, municipal, industrial, and winery projects. As an agile, 100% women-owned, WBE/COBID-certified firm, we think big while delivering the full-service, detail-oriented engineering and consulting support each project demands. With a team of 50 professionals across five offices in Oregon and California, we bring a deep passion for our work, reflected in our commitment to excellence and exceptional attention to detail. We...

Job Description Join Clark Nexsen, a JMT Company, and become part of a dynamic, collaborative team dedicated to delivering exceptional service to our clients-while making a meaningful impact on our communities and the world through the projects we help bring to life. Clark Nexsen is seeking a Senior Civil Engineer II. A Senior Civil Engineer II will be responsible for performing and directing civil engineering duties on multi-discipline building design projects of moderate to large scope, as well as projects that involve only civil engineering. Federal project experience-specifically NAFAC and DOD work-is highly desirable. General responsibilities include but are not limited to the following Performing civil engineering duties as a Senior Civil Engineer including analysis and design involving utilities, roadways, site grading, stormwater management, erosion control, and site plan preparation. Supervising and directing the work of Civil Engineers and EI/EITs assigned to the...

Together, we own our company, our future, and our shared success. As an employee-owned company, our people are Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. Company : B&V Special Projects Corp. Req Id : 113602 Opportunity Type : Staff Relocation eligible : No Full time/Part time : Full-Time Project Only Hire : No Visa Sponsorship Available: No Why Black and Veatch Black & Veatch allows you to lend your talent and perspective to humanity's biggest challenges in a flexible environment where you are empowered to grow and explore new possibilities. We offer competitive...

Job Description The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. As such a Manufacturing Engineer has a crucial role in developing new methods, tooling and machine designs and resolving processing issues/problems involved in the manufacturing of shells, primers, and/or cartridges in the ammunition plants. This position reports to the Manufacturing Engineer Manager and is based out of our Anoka office. What you'll do:...

Together, we own our company, our future, and our shared success. As an employee-owned company, our people are Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. Company : B&V Special Projects Corp. Req Id : 113376 Opportunity Type : Staff Relocation eligible : No Full time/Part time : Full-Time Project Only Hire : No Visa Sponsorship Available: No Why Black and Veatch Black & Veatch allows you to lend your talent and perspective to humanity's biggest challenges in a flexible environment where you are empowered to grow and explore new possibilities. We offer competitive...

Position Responsibilities: Collaborate with cross-functional teams, including several engineering disciplines, operations leadership, and quality engineering to support the production and manufacturing processes for the F-15 aircraft Ensure support for efficient daily operations by supporting daily build plans and constraint identification and removal Utilize data and teaming with other functions to identify opportunities to improve the production of the F-15 fighter jet Implement quality and producibility production improvement initiatives Support operations by streamlining processes, improving quality, and ensuring timely delivery of products to our customers Utilize data analysis and engineering principles to drive continuous improvement initiatives Participate in design reviews and provide input on manufacturability and assembly considerations. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location...

Salary: $36.05 - $46.65 Hourly Location : Plymouth, MN Job Type: Full Time Regular Job Number: 202600035 Department: Public Works Opening Date: 04/08/2026 Closing Date: 4/27/2026 8:00 AM Central Description At the City of Plymouth, we all work together to add quality to life. This mission and our guiding values - CIVIC: customer focus, integrity, visionary, inclusion and connection - shape our work as we advance the City Council's strategic priority to be a city of choice. We are seeking candidates who are eager to adopt and champion our mission and values. Graduate Engineer Assist in performing technical engineering, water resources and solid waste coordination and applies the principles and practices of civil engineering and water resources to public works tasks. Essential Functions Assist water resources team to protect and maintain drainage infrastructure, natural resources and the public water supply. Provide technical support with a variety of water...

Who We Are: Barrett Distribution Centers is a leader in providing customized third-party logistics, omni-channel distribution, and direct-to-consumer fulfillment services for customers in a variety of industries. We are - more than anything else - a trusted consultant to our customers, working tirelessly to find solutions to their business challenges. Who We're Looking For: We're always on the lookout for smart, hard-working, and skilled top performers who are interested in joining a fantastic team within a fast-growing company If you're great at what you do, passionate about doing it, and looking for a new home that rewards excellent work, effort, and collaboration, Barrett is the place for you! Why You'll Love a Career at Barrett Distribution Centers: Health, dental, and vision insurance Opportunities for advancement - we love to promote from within! Ongoing training and leadership development Profit-sharing program - all employees benefit when the company...

What Your Day Will Look Like: As a Professional Engineer, you'll apply engineering principles and technical expertise to the design and analysis of water and wastewater infrastructure projects. You'll take ownership of specific design tasks, coordinate with multidisciplinary teams, and ensure that all work meets technical standards, regulatory requirements, and client expectations while continuing to develop your professional engineering judgment and leadership skills. What You'll Do: • Prepare and review design plans, calculations, and technical documentation for pipelines, pump stations, and treatment systems. • Apply engineering standards and design codes to ensure technical accuracy and regulatory compliance. • Conduct hydraulic modeling, flow analysis, and system evaluations to support design and planning decisions. • Coordinate design efforts across internal teams, subconsultants, and regulatory agencies. • Support project managers with technical input, cost...

Engineer III is a team leader who is responsible for leading and overseeing product development projects from start to finish, including directing the activities of other team members. Engineers at this level work under general direction from senior staff, and their work is typically reviewed upon completion, or at major project milestones (design reviews). Duties and Responsibilities: • Designing & releasing innovative medical devices that are safe and effective • Project management, including directing the activities of other team members • Subject matter expert in one or more areas; able to solve complex / challenging engineering problems within their area of expertise, and generally able to tackle moderately complex engineering problems • Participating in and leading risk management activities, with the assistance & participation of senior level subject matter experts • Creating regulatory compliant design history files, including personal generation of DHF...

Position Description About Legrand Legrand is a global specialist in electrical and digital building infrastructures. We improve lives by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that deliver and control power, light and data to customers worldwide. Legrand has been in the building-transformation business through electrical switches, wires, cables, controls, and shades, and more recently through audio/video, data centers and lighting. Position Overview Legrand is seeking a collaborative and forward-thinking Mechanical Design Engineer to join our Data, Power & Control (CCB) Team in Anaheim, CA. In this role, you will contribute to engineered-to-order (ETO) solutions that help our customers build reliable, scalable, and efficient systems. We welcome applicants who are passionate about solving problems, innovating within existing design platforms, and working closely with...