26 industrial engineering technician jobs found

*This position is contingent upon contract award* Amentum is seeking a motivated and technically capable Field Engineer - Electrical / Mechanical Integration to join our engineering team based in Houston, TX. This is a hands-on, multifaceted role that blends electrical troubleshooting, mechanical installation support, field execution, engineering design review, wiring documentation, test support, and technician mentorship. The ideal candidate has a strong technical foundation, preferably supported by a STEM degree, and direct experience working with fielded hardware that includes electrical systems, low-voltage circuits, sensors, wiring harnesses, connectors, mechanical interfaces, brackets, enclosures, mounting hardware, and instrumentation. This role requires someone who can work from schematics, wiring diagrams, mechanical drawings, interface control documents, and field work instructions to support installation, checkout, fault isolation, corrective action, and...

*This position is contingent upon contract award* Amentum is seeking a skilled and driven Mechanical Engineer to join our engineering team based in Houston, TX. This is a design-focused role that spans the full product lifecycle - from early concept development through hardware fabrication, installation, and on-site operation. The ideal candidate is a licensed or degree-qualified mechanical or aerospace engineer who brings deep expertise in mechanical systems design, structural analysis, and high-pressure fluid systems, and who communicates and collaborates effectively across engineering and operations teams. This position offers the opportunity to lead and participate in design reviews, work alongside vendors to bring hardware from drawing to reality and provide direct technical support during field installation and testing. If you are looking for a role where your engineering decisions have real, visible consequences on mission-critical systems, this is the opportunity for...

*This position is contingent upon contract award* Amentum is seeking a skilled and driven Electrical Engineer to join our engineering team based in Houston, TX. This is a design-focused role that spans the full product lifecycle - from early concept development through hardware design, fabrication, installation, and on-site operation. The ideal candidate is a licensed or degree-qualified electrical or systems engineer who brings expertise in low voltage electronics, wiring systems, sensor integration, and harness design, and who communicates and collaborates effectively across engineering and operations teams. This position offers the opportunity to lead and participate in design reviews, work alongside vendors to bring electrical hardware from schematic to reality, and provide direct technical support during field installation and testing. If you are looking for a role where your engineering decisions have real, visible consequences on mission-critical systems, this is the...

Job Title: Manufacturing Engineer - Remanufacturing Location: Wolfforth, Texas Hours- Monday-Friday 7AM-4PM Position Summary The Manufacturing Engineer - Remanufacturing is responsible for the technical execution of our remanufacturing program. This position serves as the bridge between incoming customer equipment and production by evaluating existing packages, developing engineering documentation, creating bills of material, supporting fabrication, and ensuring rebuilt equipment can be manufactured efficiently. This is a highly collaborative, hands-on drafting role. The successful candidate should expect to spend approximately 30-50% of their time on the manufacturing floor working alongside production, fabrication, assembly, and quality teams to inspect equipment, resolve technical issues, validate designs, and support continuous improvement initiatives. The ideal candidate is highly mechanical, enjoys solving unique engineering problems, and is comfortable working with...

Direct Hire - DCN Mechanical / Piping Engineer - ETO (Houston, TX) Base Salary: $90K-$135K + 10-20% Performance Bonus Location: Onsite, Houston, TX 77072 No sponsorship or relocation. Local candidates only. About the Role Join a leading-edge engineering team focused on designing, constructing, and commissioning mechanical and piping systems for hyperscale data center infrastructure modules. As a Mechanical / Piping Engineer, you will ensure the reliability, efficiency, and safety of critical data center systems from concept through commissioning. This is a direct hire opportunity with significant potential for career progression and exposure to fast-growing, technology-driven projects. Responsibilities - Lead and approve mechanical and piping design documentation to meet industrial standards and client specifications. - Oversee and deliver technical requisitions, equipment lists, valve lists, and line sizing studies. - Assess vendor quotations and support procurement with...

Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient climate solutions for buildings, homes and transportation, it's our responsibility to put the planet first. For us at Trane Technologies, and through our businesses including Trane® and Thermo King, sustainability is not just how we do business-it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what's possible for a sustainable world. Learn about our benefits designed for you to Thrive at work and at home. We boldly go. Where is the work: Monday to Thursday, work onsite with your colleagues. Fridays, choose your work location, balancing what your work requires. Job Summary: The Sr. Product Development Engineer works as a member of the Furnace Engineering Team to develop new indoor gas furnaces. The...

Design Engineer - Mechanical (Low Voltage) Location: Humble, TX About the Role We're looking for a motivated Mechanical Design Engineer (LV) to join a collaborative team developing custom power distribution solutions used across multiple industries. In this role, you'll take concepts from idea to production-creating, updating, and releasing mechanical drawing packages that meet customer, safety, and industry standards. If you enjoy problem-solving, working hands-on with manufacturing teams, and contributing to continuous improvement, this role offers strong growth potential. Key Responsibilities Develop and update mechanical approval drawings based on project requirements and customer specifications. Create and release manufacturing drawings, including sheet-metal fabrication details (flat patterns and bend profiles) and mechanical BOMs. Ensure drawings are released on time to support production schedules. Support welding, fabrication, and assembly teams...

Do you want to help engineer what's next? Simpson Gumpertz & Heger (SGH) is a national engineering firm committed to delivering holistic advice for our clients' most complex challenges. We leverage our collective and diverse experience, technical expertise, and industry knowledge of structures and building enclosures, advanced analysis, performance & code consulting, and applied science & research to deliver unrivaled, comprehensive solutions that drive superior performance. With 800 employees in offices nationwide, SGH's industry-leading teams constantly seek to advance the meaning of what's possible. What makes careers at SGH so special? The only way to advance is to question and explore. Every member of the SGH team is both a learner and an educator, committed to advancing ourselves, our teams, and our industry. Together we are creating a community that never settles for what is but always seeks what could be. There are many reasons to love SGH: Our Work:...

Amphenol Fiber Systems International (AFSI) is a full service fiber optic company specializing in the fabrication and manufacture of fiber optic connectivity products and systems. Our commitment to technical excellence makes us an industry leader in producing sophisticated products and professional technical assistance in the fiber optic industry. AFSI, located in Allen, Texas, has and will continue to base its strategy on technical and application support, quality assurance, product performance and value. Cable Harness Design Engineer Engineering • Allen, TX Onsite • Full-time Reports To: Design Engineering Manager - Cable Harness Salary Range: $70,000 - $95,000 About Amphenol Fiber Systems International Amphenol Fiber Systems International (AFSI), based in Allen, Texas, is a leading manufacturer of harsh-environment fiber optic connectivity products serving the military, telecommunications, and industrial markets worldwide. Since 1993, AFSI has built a reputation...

Complete projects for the Project Engineering Special Technology team as a Controls Engineer who has skills in Control Devices, PLC, Software, Automation, Autonomous self-propelled vehicles, and awareness of mechanical systems. We offer: Career Development Competitive Compensation and Benefits Pay Transparency Global Opportunities Learn More Here : https://www.dematic.com/en-us/about/careers/what-we-offer/ Dematic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of...

Overview Shermco Industries is looking for an Electrical Designer in our Cedar Park, TX office Responsibilities Operating under detailed instructions and review, the purpose of this position is to provide the essential technical knowledge and perform the work listed This role has the responsibility to promote Fluor's competitiveness within the global marketplace by delivering quality services of unmatched value and technical competence The purpose of this position is to work on design and perform 3D layout of moderate scope to support the Design Area Lead or Lead Prepare 2D Computer Aided Design (CAD) drawings of moderate complexity Review drawings, and vendor equipment documentation of basic to moderate complexity within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution Perform bulk material take-off analysis and tabulations Adhere to industry codes and standards as well as department...

Diasorin is a global leader in diagnostic solutions, pushing the boundaries of science and technology to create cutting-edge tools that improve healthcare worldwide. With a legacy spanning over 50 years, we've earned our reputation for excellence by developing innovative diagnostic assays and instruments that are trusted by healthcare providers around the world. Our broad offering of diagnostic tests and Licensed Technology solutions, made available thanks to ongoing investments in research, positions us as the player with the widest range of specialty solutions in the sector and identifies us as the "Diagnostics Specialist." Why Join Diasorin? Impactful Work: When you join Diasorin, you become part of a team that's dedicated to improving lives. Your contributions will directly impact patient care, making a meaningful difference in the world. Global Reach & Innovation: Our work transcends borders. Joining Diasorin means collaborating with colleagues from...

TITLE: Controls & Integration Engineer III, Mechanical Focus LOCATION: Houston, TX POSITION SUMMARY : Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs. Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BAS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring...

TITLE: Controls & Integration Engineer II, Electrical LOCATION : Houston, TX POSITION SUMMARY : Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs. Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems...

TITLE: Controls & Integration Engineer II, Mechanical LOCATION: Houston, TX POTISION SUMMARY : Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs. Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring...

Company Description Since its spin-off in September 2025 AUMOVIO continues the business of the former Continental group sector Automotive as an independent company. The technology and electronics company offers a wide-ranging portfolio that makes mobility safe, exciting, connected, and autonomous. This includes sensor solutions, displays, braking and comfort systems as well as comprehensive expertise in software, architecture platforms, and assistance systems for software-defined vehicles. In the fiscal year 2024 the business areas, which now belong to AUMOVIO, generated sales of 19.6 billion Euro. The company is headquartered in Frankfurt, Germany and has about 87.000 employees in more than 100 locations worldwide. Job Description AUMOVIO is leading the way in advanced driver assistance and autonomous trucking solutions through a groundbreaking partnership with Aurora Innovation, Inc . Together, we are building the first commercially scalable autonomous trucking system in...

Company Description Since its spin-off in September 2025 AUMOVIO continues the business of the former Continental group sector Automotive as an independent company. The technology and electronics company offers a wide-ranging portfolio that makes mobility safe, exciting, connected, and autonomous. This includes sensor solutions, displays, braking and comfort systems as well as comprehensive expertise in software, architecture platforms, and assistance systems for software-defined vehicles. In the fiscal year 2024 the business areas, which now belong to AUMOVIO, generated sales of 19.6 billion Euro. The company is headquartered in Frankfurt, Germany and has about 87.000 employees in more than 100 locations worldwide. Job Description AUMOVIO is leading the way in advanced driver assistance and autonomous trucking solutions through a groundbreaking partnership with Aurora Innovation, Inc . Together, we are building the first commercially scalable autonomous trucking system in...

Job Type Full-time Description Plant Engineer Sugaright, LLC Location: Dallas, TX Employment Type: Full-Time FLSA Status: Exempt About the Position Sugaright, LLC is seeking a hands-on Plant Engineer to support the safe, reliable, and efficient operation of our manufacturing facility. This position will lead and support capital projects, equipment reliability initiatives, process improvements, troubleshooting, and plant engineering documentation. The ideal candidate is a practical problem-solver who is comfortable working in an active industrial environment and collaborating with Operations, Maintenance, Quality, Safety, contractors, and equipment vendors. Key Responsibilities Provide day-to-day engineering support to Operations and Maintenance. Troubleshoot equipment, process, utility, and control-system issues. Develop practical corrective actions that improve equipment reliability and plant performance. Plan and execute capital and expense projects...

Company History: Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 10 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. With over 50 years of industry experience, Fathom is at the forefront of the industry 4.0 digital manufacturing revolution serving clients in the technology, defense, aerospace, medical, automotive and IOT sectors. Fathom's extensive certifications include ISO 9001:2015, ISO 9001:2015 Design, ISO 13485:2016, AS9100:2016, NIST 800-171 and ITAR. Summary of Responsibilities: The Methods Development team member is responsible for reviewing all customer supplied...

Job Type Full-time Description W-Industries is an energy service company that specializes in Automation Solutions, I&E Construction Services, Power Generation and Packaged Equipment for the Energy and Industrial markets. Our expertise encompasses the full spectrum of system technologies from pneumatic - hydraulic control systems to state-of-the-art programmable solutions to chemical injection systems, and everything in-between. This position supports the electrical design of the manufacturing and operation of company equipment as well as providing technical support between manufacturing, engineering, and field operations. Duties include project support for new and ongoing applications. Familiarity with electrical control panel design, testing and inspection is desired. Knowledge of either NEC and/or IEC standards is preferred. Requirements Supports all electrical engineering and design related activities for individual projects with review from the Jr. and Sr....