19 machine design engineer jobs found

The Opportunity Ulteig is seeking a qualified System Protection Engineer to serve as a technical lead on protective relay projects, compliance studies, and related work within the Automation, Integration, and System Protection (AISP) Department. This position is responsible for designing, developing, testing, and commissioning protection and control systems, primarily for hydroelectric facilities and associated substations, while also providing broader support across Ulteig's system protection engineering initiatives. This role requires periodic travel throughout California to support field activities, which may include site walkdowns, commissioning, troubleshooting, demolition and construction support, and other related tasks. Candidates must be based in California and willing to travel statewide, and occasionally out of state, as project needs require. What You'll Do Develop complete design packages for protective relay replacement projects that include one-line...

The Opportunity Ulteig is seeking qualified candidates for the position of Sr. Protection Engineer (Hydro & Pumping) within the Automation, Integration, and System Protection (AISP) Department. This position is responsible for designing, developing, testing, and commissioning protection and control systems, primarily for hydroelectric facilities and associated substations, while also providing broader support across Ulteig's system protection engineering initiatives. This role requires periodic travel throughout California to support field activities, which may include site walkdowns, commissioning, troubleshooting, demolition and construction support, and other related tasks. Candidates must be based in California and willing to travel statewide, and occasionally out of state, as project needs require. The Sr. Protection Engineer acts as a technical leader and will plan, schedule, and coordinate detailed phases of assigned project work. What You'll Do Develop complete...

Project-Based Instructor - CNC Field Service Engineer (W-2 Employee) Position Type: Project-Based Instructor - CNC Field Service Engineer (W-2 employee) Compensation: $700 to $900 per teaching day, plus prepaid airfare, hotel, rental car, mileage, and other covered travel costs. Meals are reimbursed at the federal per-diem rate. Overview National Technology Transfer, Inc. is enlarging its instructional team to deliver CNC field service and machining courses (3-axis, 5-axis, machine tool alignment, positioning and accuracy, troubleshooting, etc.) in the United States, with priority assignments on the West Coast. Using NTT-developed course content and curriculum, together with portable training equipment, you will convert your installation, service, and troubleshooting expertise into engaging, hands-on learning that strengthens America's skilled-trades workforce. Knowledge of aerospace and airframe products is a significant advantage. Instructors enjoy stable work and a scalable...

Project-Based Instructor - CNC Field Service Engineer (W-2 Employee) Position Type: Project-Based Instructor - CNC Field Service Engineer (W-2 employee) Compensation: $700 to $900 per teaching day, plus prepaid airfare, hotel, rental car, mileage, and other covered travel costs. Meals are reimbursed at the federal per-diem rate. Overview National Technology Transfer, Inc. is enlarging its instructional team to deliver CNC field service and machining courses (3-axis, 5-axis, machine tool alignment, positioning and accuracy, troubleshooting, etc.) in the United States, with priority assignments on the West Coast. Using NTT-developed course content and curriculum, together with portable training equipment, you will convert your installation, service, and troubleshooting expertise into engaging, hands-on learning that strengthens America's skilled-trades workforce. Knowledge of aerospace and airframe products is a significant advantage. Instructors enjoy stable work and a scalable...

Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient climate solutions for buildings, homes and transportation, it's our responsibility to put the planet first. For us at Trane Technologies, and through our businesses including Trane® and Thermo King, sustainability is not just how we do business-it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what's possible for a sustainable world. Learn about our benefits designed for you to Thrive at work and at home. We boldly go. Where is the work: Virtual This position may be performed remotely or from a Trane Technologies hub location, based on business needs and candidate location. Final work arrangement details will be discussed during the hiring process What you will do: Position Summary: Trane...

Overview SSOE is seeking an experienced Electrical Engineer for a variety of building design-related projects. The ideal candidate will have consulting design experience in power distribution, lighting, grounding, and auxiliary systems familiarity for healthcare, educational and/or commercial facilities. This position is eligible for remote work. To be eligible for a full-time remote position, the candidate must reside in Michigan and live within 1-2 hours of the SSOE Troy, Michigan office to ensure availability for periodic in-person collaboration in the office and client engagement Why Join SSOE? At SSOE, you'll work with amazing colleagues and be part of something big! We've consistently been named a "Great Place to Work" and are experiencing the most successful years in our history. Along with industry-leading salary compensation, you'll be eligible to purchase shares in the company - shares that have significantly outperformed both the S&P and Dow averages. AI...

Senior Physical Engineer - Renewables (PPM) United States (Remote) Salary Range: $100K - $150K / year Based on the Denver, Colorado labor market. Location: Lakewood, CO (local/in-office) or full-time remote candidates. Role Overview: As a Senior Physical Engineer in the Renewables group, you will be responsible for performing engineering design and analysis under the responsible charge of a Professional Engineer. You will support client projects and provide quality deliverables that are on time and within the defined budget. Essential Responsibilities: What you will do: Phase Manager (PPM): Your primary responsibility will be project-based leadership, with short-term focus on project scope, budget, task delegation, client interaction and execution, and ensuring technical quality. Consult regularly with the Team Lead on key decisions and activities. QA / QC work: Implement the NEI Quality Assurance Plan. Check the work of designers, drafters, and engineers...

Project Engineer, Physical - Datacenters Salary Range: $125K - $150K / year Based on the Denver, Colorado labor market. Location: Lakewood, CO (local/in-office) or full-time remote candidates. As a Project Engineer in the Datacenter group, you will be responsible for performing engineering design and analysis under the responsible charge of a Professional Engineer. You will support client projects and provide quality deliverables that are on time and within the defined budget. Essential Responsibilities: What you will do: 50% QA / QC work: Implement the NEI Quality Assurance Plan. Check the work of designers, drafters, and engineers for overall quality and accuracy. 20% Training: Train junior level engineers and designers in areas of physical design of electrical substations & BESS facilities. 20% Writing: Write technical go-bys and training documents. Assist with the creation and enforcement of technical standards across the department....

Role Summary: As a Senior Civil Engineer, you'll lead the delivery of civil and land development designs for utility-scale renewable energy projects that support a cleaner, more resilient energy future. In this role, you'll apply advanced civil engineering judgment, technical leadership, and a collaborative mindset to drive high-quality project execution from early design through final deliverables. You'll own complex scope across projects and portfolios, mentor and develop other engineers, and help shape the standards and processes that define engineering excellence at Revamp - while working with a mission-driven and employee-owned team that values ownership, craftsmanship, continuous improvement, and meaningful impact. Duties & Responsibilities: Technical Design & Engineering Judgment Create highly complex civil engineering plans, details, calculations, and documentation - including site layouts and designs in AutoCAD/Civil 3D - for utility- and commercial-scale...

About the Position As a mid-level Renewable Development Engineer in the Renewable Development group, you will be the primary liaison for development, bid support, and/or preliminary (0%-30%) PV, BESS and Wind design. Design work between internal Operations and Sales stakeholders, and external stakeholders (e.g., Clients). The Renewable Development Engineer works collaboratively with these Stakeholders to perform preliminary PV electrical and PV civil design. This opportunity is available to both local / in-office (Lakewood, CO) and full-time remote candidates. Essential Responsibilities Designs PV, BESS and Wind projects in all areas of the US. Passionate about learning multi disciplines and multi technologies. Acts as a liaison between the solar design team and relevant internal and external stakeholders Delivers preliminary PV, BESS and/or Wind design (0-30%). Project level of detail is greatly dependent on contracted scope. Design can include partial or...

Miller-Remick is a full-service MEP engineering firm looking for energetic, self-motivated, and innovative individuals to join our team. If you think you are a good fit for this role, we encourage you to apply. We are looking for a Senior Electrical Engineer to act as lead on multiple concurrent capital projects ranging from $5M - $100M across a variety of markets, with a strong focus on healthcare. This person should have a proven history of performing complex work with efficiency and little oversight, and have the aptitude to mentor and provide guidance to more junior staff. This position may be filled anywhere in the United States. Our clients include federal agencies (e.g. Department of Veterans Affairs, Department of Defense, General Services Administration, and the Federal Bureau of Prisons), as well as state and local governments. Projects have varied degrees of complexity and a wide range of estimated construction costs and include new construction and renovations of...

Miller-Remick is a full-service MEP engineering firm looking for energetic, self-motivated, and innovative individuals to join our team. If you think you are a good fit for this role, we encourage you to apply. We are looking for a Sr. Mechanical Engineer to act as lead on multiple concurrent capital projects ranging from $5M - $100M across a variety of markets, with a strong focus on healthcare. This person should have a proven history of performing complex work with efficiency and little oversight, and have the aptitude to mentor, and provide guidance to, more junior staff. This position may be filled anywhere in the United States. Our clients include federal agencies (e.g. Department of Veterans Affairs, Department of Defense, General Services Administration, and the Federal Bureau of Prisons), as well as state and local governments. Projects have varied degrees of complexity and a wide range of estimated construction costs and include new construction and renovations of...

Summary As a Senior Electrical Engineer on Revamp's High Voltage Substation team, you will serve as a senior contributor and subject-matter expert across the spectrum of substation design, primarily focused on both protection & control (P&C) and physical design. You will take ownership of QA/QC reviews and act as a confident internal and external technical resource - reviewing and redlining design deliverables, cross-checking drawings, mentoring junior engineers, and collaborating with the multi-disciplinary stakeholders in an employee-owned culture where every individual's contributions strengthen project outcomes, increase company success, and meaningfully advance the clean-energy transition. Please note: the advertised salary above is listed in USD. The range in CAD is approximately C$186,000 - 236,000. Duties & Responsibilities: Technical Design & Quality Assurance Serve as a multi-disciplinary subject matter expert in substation design with a focus...

Team Lead - Physical Engineering (Utility Substations) About the Position As a Team Lead of Physical Engineering in the Utilities department, you will be responsible for managing a team comprised of engineers, drafters, and designers. A Team Lead's (TL's) primary responsibility will be the accurate, timely, and quality completion of physical/structural substation engineering scopes assigned to the team. The Team Lead will contribute to the development and refinement of internal processes and workflows that improve quality, consistency, and efficiency across the department. They are responsible for promoting, implementing, and reinforcing these processes while serving as a mentor and coach to their team. Team Leads support the professional and technical development of employees, encouraging accountability, collaboration, and continuous improvement. Salary Range: $100,000 - $150,000 / year The salary range above is based upon the Denver, Colorado labor market. This...

About the Organization E2 Consulting Engineers, LP (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. At E2, we value safety, innovation and collaboration, and we are dedicated to excellence. Overview E2 is seeking a Pipeline / Instrumentation & Controls Principal Engineer to support natural gas utility and energy infrastructure projects throughout Southern California. This position will support the planning, design, execution, and commissioning of pipeline, distribution regulator station, gas control, automation, and remote monitoring projects. The engineer will work directly with clients, project managers, design teams, construction personnel, equipment vendors, and other...

Title: Lead Substation Physical Engineer Location: Remote US Ready to make a difference? ICF is seeking an experienced Substation Physical Engineer to lead the design and execution of high-voltage substation projects (typically 69kV to 500kV) with the goal of providing excellent quality work for our clients. We are a relentlessly client-focused group who are re-imagining, re-designing, and re-engineering the way electric utilities tackle industry problems. We are seeking passionate and innovative people who are constantly looking for ways to provide better quality engineering services for our clients. Why you'll love working here: Quality of life: Fully remote, flexible schedule, work-life balance Investment of the community: Donation matching, volunteer opportunities Investment in you: Tuition reimbursement, access to professional development resources, 401k matching, Employee Stock Purchase Plan And many, many more (Ask your recruiter for more details!) The...

Miller-Remick is a full-service MEP engineering firm looking for energetic, self-motivated, and innovative individuals to join our team. If you think you are a good fit for this role, we encourage you to apply. We are looking for a Sr. Structural Engineer to act as lead on multiple concurrent capital projects ranging from $5M - $100M across a variety of markets, with a strong focus on healthcare. This person should have a proven history of performing complex work with efficiency and little oversight, and have the aptitude to mentor, and provide guidance to, more junior staff. Our clients include federal agencies (e.g. Department of Veterans Affairs, Department of Defense, General Services Administration, and the Federal Bureau of Prisons), as well as state and local governments. Projects have varied degrees of complexity and a wide range of estimated construction costs and include new construction and renovations of hospitals, healthcare and military facilities, federal office...

About the Opportunity: Saratech is seeking a dynamic senior designer to contribute to the design, development, and integration of the Flight Control Systems. You will join a team developing the world's most efficient aircraft and balance creativity with experience while working within an effective team atmosphere. Salary Range: $85 - $90 per hour Duties and Responsibilities: Secondary Flight Control System Technical Ownership Design, develop, and detail the Secondary Flight Control System in compliance with technical, performance, and regulatory requirements. Perform trade studies to optimize architecture, function, weight, cost, and manufacturability. Vendor & Program Coordination Lead technical coordination with suppliers for the development of the Secondary Flight Control System through certification and delivery. Serve as the primary technical point of contact for Secondary Flight Control System vendors, ensuring alignment with program requirements,...

TKDA is a 100% employee-owned engineering, architecture, and design firm. We are expanding our presence in California and across the West Coast and are seeking a seller-doer Project Manager / Senior Mechanical Engineer/ Regional Client Service Lead to help lead and grow our engineering practice while managing client relationships and projects. The individual selected for this position will be responsible for providing technical oversight and project leadership in the riverside office, as well as contributing significantly to the growth of engineering services within California. Additional responsibilities include working with our national market leads and regional Vice President to develop new client relationships, particularly within the manufacturing and food and beverage sectors and expand existing accounts in California. Areas of technical expertise shall be relevant to mechanical design include HVAC, plumbing, and associated facility systems. Although engineering expertise is...