43 aerospace and defense jobs found in Englewood, CO

Amentum is actively seeking a Supervising Discipline Engineer (SDE). This role will be responsible for a variety of engineering tasks in the initial planning through final design phase for projects of advanced complexity. The SDE is responsible for technical electrical project knowledge and managing the electrical engineering team to meet customer and project requirements regarding scope, scheduling and budgets. Provides a liaison between discipline engineers and Project Managers with respect to project scope, budget, scheduling and overall engineering and design requirements and employee administration. The SDE shall report to the Chief Discipline Engineer. Local candidates in Denver, CO preferred but we are open to this role being fully remote. Key Responsibilities • Assume responsibility for ensuring that engineering documents comply with applicable state laws/regulations, including affixing registered engineer seal when required. • Coordinate the electrical discipline's...

Amentum is actively seeking a Senior Electrical Engineer with experience in industrial facility and plant design. The position is located in the Englewood, CO office. The Sr. Engineer is responsible for a variety of engineering and design tasks in the initial planning through final design for projects of advanced complexity under the minimal supervision oSInaf a Supervising Electrical Engineer. The Engineer interacts with other disciplines, project support groups, vendors and client representatives as appropriate on assigned projects and is responsible for initiating and developing engineering calculations, studies and drawings through completion in conformance with the requirements, applicable codes, and design criteria established by the project. Key Responsibilities • Perform a range of design development, analysis, or review tasks independently. • Responsible for complete designs, analyses, or design reviews independently or as the team leader. • May lead engineering...

At ispace U.S., we're not just going to the Moon-we're redefining how we get there. Our missions push the boundaries of human and robotic exploration, driven by our belief: "Expand our Planet. Expand our Future." By providing cost-effective lunar transportation, we are pioneering a future where space is within reach for scientific discovery, commercial ventures, and sustainable exploration. With locations in Japan, Luxembourg, and the United States, ispace is rapidly growing and leading the way in lunar exploration and development. Our U.S. branch is based in Englewood, Colorado, and focuses on high-capacity payload lunar landers designed to support future lunar missions. Our team is made up of innovators, problem-solvers, and visionaries committed to making space more accessible and fostering the next generation of space exploration. Let's go to the Moon together! Our team is growing, and we are actively seeking talented individuals who share our passion for space. We are...

Who are Answer Engineering and Re:Build Manufacturing? Answer Engineering, a Re:Build Manufacturing company, is an exceptional engineering firm providing aerospace design and analysis services to companies around the world. The team tackles challenging engineering problems ranging from electric vertical take-off platforms (EVTOL), to space tourism. To meet the demands of our customers, Answer Engineering is embarking on building a first-class support organization to ensure the engineering team can remain focused on engineering challenges. Answer Engineering is a casual work environment where discussions take place in the open, events are frequent including company BBQs and ski trips, and our office remains stocked with a variety of snacks and beverage options. Answer Engineering reinforces the value of having a diverse workforce and promotes equity and inclusion for all employees. Re:Build Manufacturing is a growing family of industrial and engineering businesses combining...

Who are Answer Engineering and Re:Build Manufacturing? Answer Engineering, a Re:Build Manufacturing company, is an exceptional engineering firm providing aerospace design and analysis services to companies around the world. The team tackles challenging engineering problems ranging from electric vertical take-off platforms (EVTOL), to space tourism. To meet the demands of our customers, Answer Engineering is embarking on building a first-class support organization to ensure the engineering team can remain focused on engineering challenges. Answer Engineering is a casual work environment where discussions take place in the open, events are frequent including company BBQs and ski trips, and our office remains stocked with a variety of snacks and beverage options. Answer Engineering reinforces the value of having a diverse workforce and promotes equity and inclusion for all employees. Re:Build Manufacturing is a growing family of industrial and engineering businesses combining...

Amentum is actively seeking a mid to senior level Electrical Field Engineer, located north of the Las Vegas, NV area, responsible to act as a liaison between engineering and construction and perform a variety of engineering tasks in the initial planning through final design for projects of advanced complexity under the minimal supervision of a Supervising Electrical Engineer. The Engineer interacts with other disciplines, project support groups, vendors and client representatives, as well as initiating and developing engineering calculations, studies and drawings. Responsibilities - Establish and maintain clear lines of communication between the engineering office and the construction site ensuring seamless coordination. - Act as the primary point of contact for all interface-related issues and inquiries, facilitating resolutions in a timely manner. - Implement communication protocols. - Monitor progress and performance against interface milestones, identifying risks and...

Purpose and Scope: Amentum is currently searching for a Civil Engineer 2 to work in our Englewood, CO office to perform a variety of engineering assignments in planning and overseeing research, development, design, manufacture, test, installation, operations, and maintenance of electronic equipment and systems and generally as a member of a design, analysis, or review team. Essential Responsibilities: 1. Perform design, development or review tasks in specific areas under some supervision. 2. Design a portion or section of an analysis or design review. 3. Generate sections of design specifications of more complex projects or complete specifications of less complex projects. 4. Prepare, deliver and submit technical presentations for in process design and review meetings. 5. Establish and maintain a filing system or databases as needed for tracking project status. 6. Develop, maintain and produce technical documentation and system/subsystem specifications. 7. Direct...

Amentum is seeking a high performing, team oriented I&C Engineer to support our environmental management, defense, national security and national laboratory customers in our Englewood, CO office. The Instrumentation and Control engineering team you would be joining includes licensed professional engineers that are recognized technical experts in nuclear waste treatment, radioactive waste cleanup, environmental management and advanced clean energy solutions. Amentum provides integrated project lifecycle capabilities, operational excellence, consulting services, engineered solutions, best in class leaders and a reputation for delivery. As a Amentum I&C Engineer you would be responsible for utilizing your engineering knowledge and design experience to support conceptual, preliminary and detailed design projects. We are looking for engineers with a proven track record working with both technologies and your peers. Experience with originating and checking standard I&C...

Join Vetegrity, a leader in managing facility engineering design, construction, renovation, maintenance programs, and raised floor infrastructure for mission-critical DoD data centers. If you're passionate about making a difference in high-stakes environments, this opportunity is for you! Position Overview: As an Electrical Engineer, you will be vital in providing electrical engineering support for technical reviews and tracking authorized service interruptions (ASI). You'll coordinate projects and maintenance activities while conducting essential electrical distribution load analyses. Your expertise will be crucial in overseeing commissioning processes, and ensuring operations run smoothly and efficiently. You will assist government project managers in transitioning and closing out projects, delivering valuable maintenance recommendations for diverse electrical systems. Your insights on energy efficiency improvements will help minimize Power Usage Effectiveness (PUE) at...

Mechanical Engineer - Clearance Required This position requires the ability to obtain a Secret security clearance. Position Overview: Provides assistance in the development of projects and services with supporting engineering calculations to include rough sizing of mechanical systems, piping, ductwork, and other facility systems and mechanical components Provides reviews of complex designs and draft Statements of Work and Performance Work Standards Supports project execution with engineering assistance for technical reviews and providing recommendations to the Government representative regarding contract status with schedule Periodic site visits to customer data centers for data collection, commissioning and other projects is required Must be able to work in a small team environment Minimum Qualifications: Bachelor's Degree in Mechanical Engineering from an accredited College or University 5 years of experience in building...

Mechanical Engineer - Security Clearance Required This position requires the ability to obtain a Secret security clearance. Position Overview: Provides mechanical engineering assistance for technical reviews, computational fluid dynamics (CFD) using TileFlow software, commissioning coordination/oversight/duties. Assists the Government project managers in transitioning and closing out of all projects from the project team to the maintenance team and provides maintenance recommendations supporting those projects. Provides technical reviews and recommendations to the Government representative regarding improvements to energy efficiency to reduce the Power Usage Effectiveness (PUE) of the data centers in regards to the maintenance and operations of existing systems. Drafts Statement of Work (SOW)/Performance Work Statements (PWS), cost estimates and acquisition package requirements for recommendations approved by the Government. Review whole scale...

Electrical Engineer - Project Support *Must have the ability to obtain Secret Security Clearance* Join Vetegrity, a leader in managing facility engineering design, construction, renovation, maintenance programs, and raised floor infrastructure for mission-critical DoD data centers. If you're passionate about making a difference in high-stakes environments, this opportunity is for you! Position Overview: Assists in the development of projects and services with supporting engineering calculations to include rough sizing of electrical systems, generators, uninterruptible power supplies (UPSs), conduits, conductors, and other electrical components Maintains the existing electrical studies using Easy Power Software Creates technical electrical engineering review of complex multi-discipline designs and drafting of Statements of Work (SOW), Performance Work Statement (PWS) with supporting cost estimates annually Supports project execution with...

Job Summary: Lockheed Martin is seeking a Structures Engineer to provide GeoXO Structures Engineering support through Preliminary Design Review (PDR) and Critical Design Review (CDR) . This role requires expertise in CREO Drawing and Release, EPDM, and DOORS , as well as spacecraft integration, clearance validation, and structural analysis. The selected candidate will be responsible for maturing CREO CAD models, performing interface checks, and developing key engineering documentation to support program milestones. Key Responsibilities: Support CREO CAD model integration and engineering maturation from PDR to CDR level . Conduct trades and integration of the GeoXO spacecraft in CREO , ensuring interface specification alignment and model clearance checks . Perform Interface Control Document (ICD) validation checks to support spacecraft integration development for PDR and CDR . Develop and formally release the GeoXO Critical Clearance List and...

Job Title: Systems Engineer - GEOXO Program Location: Highlands Ranch, Colorado (In-person support preferred 2 days a week) Job Summary: We are seeking a highly motivated and skilled Systems Engineer to provide comprehensive engineering support for the GEOXO program. The ideal candidate will have expertise in systems engineering planning, design integration, reliability engineering, and EMI/EMC disciplines, with experience supporting spacecraft and orbital debris assessments. This role involves contributing to specification development, verification, validation, and system reviews to meet mission objectives. Key Responsibilities: 1. Systems Engineering Planning Support: Assist in planning and executing specification development, verification, validation, and modeling and analysis. Provide expertise in design integration, reliability, and EMI/EMC engineering disciplines. 2. Orbital Debris Assessment Reporting: Provide critical data to develop the Orbital...

Job Summary: Lockheed Martin is seeking a highly skilled Electro Mechanical Engineer to support drawing release packaging for the Orion spacecraft program . The successful candidate will be responsible for packaging drawing releases , managing CCTC , processing PMPs , initiating drawing problem reports , and overseeing drawing development and release schedules . This role also involves research, design, development, and testing of various electro-mechanical equipment and systems, including circuitry components, analog and digital computers, and control test equipment . Key Responsibilities: Manage and package drawing releases , ensuring compliance with CCTC management, PMP processing, and drawing problem reports . Oversee drawing development and release schedules to support engineering and production timelines. Research, design, develop, and test electro-mechanical systems for spacecraft applications. Develop electrical engineering drawings using...

Job Title: Harness Electrical Engineer Location: Onsite - Littleton/Denver CO Program: GeoXO - Lockheed Martin About the Program: The GeoXO (Geostationary Extended Observations) program, developed by Lockheed Martin for NOAA, represents the next generation of geostationary weather satellites. Building upon the success of the GOES-R series, GeoXO will provide enhanced weather forecasting capabilities and address emerging environmental monitoring needs. This is a unique opportunity to contribute to a program that directly supports the safety and well-being of communities through advanced environmental data collection and analysis. Position Overview: We are seeking a highly skilled Harness Electrical Engineer to join the GeoXO Harness Engineering team. This onsite position is based in Littleton, CO and offers the opportunity to work on critical spacecraft harness design and integration tasks. As an embedded member of the team, you will collaborate closely with...

A new space race has begun. True Anomaly seeks those with the talent and ambition to build innovative technology that solves the next generation of engineering, manufacturing, and operational challenges for space security and sustainability. OUR MISSION The peaceful use of space is essential for continued prosperity on Earth-from communications and finance to navigation and logistics. True Anomaly builds innovative technology at the intersection of spacecraft, software, and AI to enhance the capabilities of the U.S., its allies, and commercial partners. We safeguard global security by ensuring space access and sustainability for all. OUR VALUES Be the offset. We create asymmetric advantages with creativity and ingenuity What would it take? We challenge assumptions to deliver ambitious results It's the people. Our team is our competitive advantage and we are better together YOUR MISSION True Anomaly is looking for you, a creative and experienced engineer, to develop and...

A new space race has begun. True Anomaly seeks those with the talent and ambition to build innovative technology that solves the next generation of engineering, manufacturing, and operational challenges for space security and sustainability. OUR MISSION The peaceful use of space is essential for continued prosperity on Earth-from communications and finance to navigation and logistics. True Anomaly builds innovative technology at the intersection of spacecraft, software, and AI to enhance the capabilities of the U.S., its allies, and commercial partners. We safeguard global security by ensuring space access and sustainability for all. OUR VALUES Be the offset. We create asymmetric advantages with creativity and ingenuity What would it take? We challenge assumptions to deliver ambitious results It's the people. Our team is our competitive advantage and we are better together RESPONSIBILITIES Lead the end-to-end design, analysis, and development of propulsion systems for...

Position Title: ElectroMechanical Engineer Subtitle (1): ElectroMechanical Packaging Design Support - EPS (Emergency Power Supply: SPRU, FBA, Battery) Subtitle (2): ElectroMechanical Packaging Design Support - C&DH (Command & Data Handling) Location: Hybrid - Highlands Ranch, CO Program Overview: Lockheed Martin Space is proud to support NOAA's Geostationary Extended Observations (GeoXO) satellite program, a next-generation constellation designed to advance weather forecasting, climate monitoring, and environmental observation. As part of this critical initiative, we are seeking a skilled and detail-oriented ElectroMechanical Engineer to provide packaging design support for the EPS and C&DH subsystems. Key Responsibilities: • Create and release 3D models and 2D drawings, including ICDs, detailed parts, and complex assemblies, using Creo and EPDM while adhering to Lockheed Martin command media, program-specific requirements, and electronics packaging...

Job Title: ElectroMechanical Packaging Engineer Location: Highlands Ranch, CO (In-person support required 4 days/week) Job Summary: Bay Systems Consulting, is seeking an ElectroMechanical Packaging Engineer to provide critical engineering support for the NOAA Geostationary Extended Observations (GeoXO) satellite program through Critical Design Review (CDR) . This role requires an experienced professional with expertise in electro-mechanical packaging design, 3D modeling, and documentation, utilizing Creo and EPDM . The selected candidate will work closely with the GeoXO Packaging Team , engaging in both virtual and in-person collaboration. Key Responsibilities: Task 1.1: ElectroMechanical Packaging Design Support - EPS (SPRU, FBA, Battery) Serve as an embedded team member supporting the GeoXO Packaging team. Utilize Creo and EPDM to create and release models/drawings , including ICDs, detailed parts, and assemblies . Ensure compliance with LM...